|
Re: Need guidance on 700r4 swapped transmission issues
First, it did work. So the TV valve and cable is likely working. Even if it's not connnected the transmission will move both forward and reverse in a driveway.
First thing to check is to pull the bolts from the converter and see how far it will go rearward towards the transmission. You need to have less than 1/8" between the converter tabs and the flex plate. I suspect you may have lots more than this and the drive lugs have disengaged from the pump.
If you have more post how much and I can give you ideas where to go from there.
If you can not move the converter back you have serious issues. Let's not speculate just get the measurements.
|