Captain, do you still have these brackets available? Did I understand your descripton correct, I will be able to use my stock 15s and have rear disc brakes?
I was reading several different posts on front disc brake conversions, do you have any suggestions on ways to convert to disc in the front using parts found at my local auto parts supplier?
By the way, big props on your contributions to us fellow forum members!
Quote:
Originally Posted by Captainfab
This set of brackets will allow you to have rear disc brakes on your 6 x 5.5 bolt pattern 64-87 GM truck 10 and 12 bolt rear differentials, and be able to run 15" wheels. This rear disc conversion is completely bolt on with one exception. The drum/wheel register will need machined down to approximately 3.06. I do recommend upgrading to ½ wheel studs at this time, but it isnt absolutely necessary for the installation. The rotors used with these brackets as well as the calipers are easily found at your local auto parts supplier. The basic application for the rotors is '88-'98 K1500 Silverado or Suburban front rotors. The calipers used on this conversion are referred to as the D369 calipers. These are also found on the '88-'98 K1500's as well as the C1500's. A complete parts list with part numbers is included with the brackets.
The cost on this set of brackets with installation hardware is $177.50. Satin black powder coating is an additional $28.00. Shipping within the USA is a flat $11.65. If you are outside of the USA, contact me for a shipping cost. For payments I accept PayPal and money orders. Credit card payments can be made thru PayPal. To place an order, you can send me a PM here on the forum or you can email me at captainfab454 at hotmail dot com.
|