|
08-16-2024, 04:41 PM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Welding vs Bolt In
My C notch is all bolted in. Any advantages to welding it in after it it bolted in ?
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA |
|
|
|
08-17-2024, 07:49 AM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,592
|
Re: Welding vs Bolt In
Yes. Over time the bolts will stretch and loosen up a bit with frame flex
|
|
|
|
|
08-17-2024, 08:47 AM
|
#3 |
|
Senior Member
Join Date: Dec 2009
Location: TN.
Posts: 8,300
|
Re: Welding vs Bolt In
If you don't do a lot of towing and
Maybe plan on lowering it more in the near future, I would leave it. If you like the Stance and do any Heavy Towing, I would defiantly weld it and take the bolts out and use a copper spoon as a backer and weld the bolt holes up. Here's an Old Thread: https://67-72chevytrucks.com/vboard/...d.php?t=357911
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build |
|
|
|
|
08-17-2024, 04:04 PM
|
#4 |
|
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,090
|
Re: Welding vs Bolt In
No reason not to do both. Kind of depends on you welding skills.
On my 68 C10 with a C notch I bought the frame with the weld in C notch already installed. Not sure of the previous owners welding skills I added bolts and boxed the inside of the frame with 3/16" steel plate. |
|
|
|
|
08-19-2024, 12:45 PM
|
#5 |
|
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Re: Welding vs Bolt In
Boxing the frame is a great idea. Give me a chance to use the brand new plasma cutter and tig welder that I just bought. I will just leave the bolts weld it up and box the frame. Firm believer in overkill.
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA |
|
|
|
|
08-21-2024, 10:36 AM
|
#6 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
|
Re: Welding vs Bolt In
Welds & bolts; especially if not a certified welder.
As for boxing, it will be better boxed but still won't be as strong as stock since the C-channels strength is in its height. https://67-72chevytrucks.com/vboard/...d.php?t=457037
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
