67 Camaro Build

[7dee2]

Originally Posted by KevinK7

...gotta love the white accent band in the '67 deluxe seats, they look great!! (as or course does the rest of the car )

Originally Posted by CAMAROBOY68SS

The finished seats look great, yeah I love the accent band the 67 deluxe covers had just sets off the interior.

Thanks, I appreciate it you guys! I thought keeping the black-and-white thing going with just a splash of red here and there would make for a sharp combination. Also, inheriting the interior kit over 10 years ago with the original project car played a part as well!

Originally Posted by joesscamaro

For your fuel line clamps...do you have a picture of what you're using? Are you using self-tapper screws directly to sheetmetal or welding studs and simply using a nut to secure?

Yes (see the link below), if memory serves, they’re #8 or #10? x1/2” stainless steel self-tapping screws. The install procedure has been to mark the location, drill, tap, and just prior to the final install a dab of paint in the hole. Not planning on this car ever really seeing much weather.

https://www.amazon.com/dp/B005R927IC...fed_asin_title

A few of these will be used as well where needed.

https://www.amazon.com/dp/B07L49Y9LM...sin_title&th=1





The closest I could find to replacement moisture wicks (some of mine were missing) were those from Corvette Central. A little shorter than the original but I think they’ll do just fine. 2nd pic shows them installed with the crappy foam gaskets I had originally. The new molded taillight gaskets arrived and are much better.

https://www.corvettecentral.com/58-7...-pieces-491311

https://www.autometaldirect.com/tail...r-67-68-camaro