![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Junior Member
![]() Join Date: Apr 2021
Location: Santa Cruz, NM
Posts: 84
|
Re: Transmission / clutch install questions - 3OTT
There may be an alignment issue with tightening the bolts from the transmission to the bellhousing. Just to clarify and refer to my Haynes manual:
"21 Install the clutch fork... Attach the release bearing..." "22 Install the bellhousing." "23 Install the transmission." You will need a hand on the clutch fork while guiding the transmission through until it gets on the input sleeve. |
![]() |
![]() |
![]() |
Bookmarks |
|
|