Bucketlist Blazer -Restomod build 6.6liter L8T - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NDM · 10-13-2024, 11:05 AM

Exhaust purchases have begun. I will be running 3 inch 304 tubing so I will have to figure out how to adapt to the 2.5inch holley manifolds. I may end up porting the manifold exits to get closer to 3 inch. If not, It should not make much difference. The 3 inch tubing will be almost like running open headers anyway. The Speed engineering kit comes with an H and an X pipe in the kit. I will decide which I want to run eventually.

https://speed-engineering.com/produc...pr_seq=uniform

10-13-2024, 11:05 AM	#38
NDM Registered User Join Date: May 2022 Location: Illinois Posts: 181	Re: Bucketlist Blazer -Restomod build 6.6liter L8T Exhaust purchases have begun. I will be running 3 inch 304 tubing so I will have to figure out how to adapt to the 2.5inch holley manifolds. I may end up porting the manifold exits to get closer to 3 inch. If not, It should not make much difference. The 3 inch tubing will be almost like running open headers anyway. The Speed engineering kit comes with an H and an X pipe in the kit. I will decide which I want to run eventually. https://speed-engineering.com/produc...pr_seq=uniform



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.