What do these wires do? Neutral/Safety Switch - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kitsbeach** · 10-13-2024, 02:26 PM

I'm changing from a manual to an automatic on my C20 so had to extend the green reverse light wires from under the hump to the neutral safety/reverse light switch.

The blue wires are my extension (only colour I had handy).

The yellow and purple wires are my original clutch safety switch, which popped right on to the neutral safety position on the automatic neutral/reverse switch.

Name: Reverse lights wiring-4.jpg
Views: 16
Size: 60.4 KB

Name: Reverse lights wiring-4.jpg
Views: 16
Size: 60.4 KB

Name: Reverse lights wiring-3.jpg
Views: 16
Size: 63.6 KB

Name: Reverse lights wiring-2.jpg
Views: 16
Size: 63.1 KB

Started it up. Everything works.

Name: Reverse lights wiring-1.jpg
Views: 16
Size: 39.2 KB

10-13-2024, 02:26 PM	#26
kitsbeach Senior Member Join Date: May 2014 Location: Vancouver, BC Posts: 591	Re: What do these wires do? Neutral/Safety Switch I'm changing from a manual to an automatic on my C20 so had to extend the green reverse light wires from under the hump to the neutral safety/reverse light switch. The blue wires are my extension (only colour I had handy). The yellow and purple wires are my original clutch safety switch, which popped right on to the neutral safety position on the automatic neutral/reverse switch. Started it up. Everything works. __________________ Kitsbeach (Ken) 1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills" 1980 C20 Long to short & static drop "Square One"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.