Taillight Fuel Filler Hose Routing

[Joyridin]

Originally Posted by lkt1954

Joyridin- the hose works perfect.
One question- did you connect the hose to the filler fitting in the housing? If so did you clamp it or just slide it on?
Like you stated the hose is 1.5" and the hole is 1.5", so there is no way to get the hose through with s clamp. I'm thinking putting sealer on the fitting the just sliding the hose on and call it good.

Yes, I have a clamp. I used a kit from LS Fabrication. There is room to clamp it. I also hooked up a vent from the tank to the filler neck. It was a bear, but it works good.