67 Camaro Build

[7dee2]

Originally Posted by Lost in the 60's

You're braver than me, gluing the cover on over the speaker fasteners. I plan on using double sided tape, in case I need to access the screws again. Probably not much different for removal, but that 3M adhesive doesn't let go, when applied correctly.

Good point, cuz you know those speakers will never go bad, right?

But seriously (Knock on wood), I don’t expect to be back messing with the speaker fasteners anytime soon. I’m fairly certain they won’t come loose with the nyloc nuts that I used. Some folks may not know the tray cover is only glued along the front edge to keep it tucked nicely behind the seat back. Removal shouldn’t be bad as you won’t save the cover, cut along the front edge and slide the tray cover out. Clean the area as best as you can and repeat with a new cover, easy peasy.

Originally Posted by CAMAROBOY68SS

Package tray looks sharp! Might have to something similar in our 61 impala just because its a odd color, so will have to wrap it.

Thanks, I like it. Seems to be a good product, with a clean look, and a fair price.



The Bazooka sub is mounted and starting to wire the rear speakers. Made up some templates, part of the process to hopefully not f’up mounting the kick panel speakers. Need to land the speaker magnets just right to clear the lower a-pillar inner structure.