DBW pedal mounting bracket - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 03-01-2021, 03:48 PM

Quote:

Originally Posted by will69camaro

Done! Sorry i thought it was on my paypal but it's in your inbox/email now.

Shipped!

mtnbikerxt · 03-29-2021, 09:35 PM

Still selling the corvette pedal bracket for a '70 C10?

**Hart_Rod** · 04-09-2021, 04:20 PM

Quote:

Originally Posted by mtnbikerxt

Still selling the corvette pedal bracket for a '70 C10?

yes

**Hart_Rod** · 04-10-2021, 03:26 PM

Quote:

Originally Posted by mtnbikerxt

Still selling the corvette pedal bracket for a '70 C10?

Let me know if you still need a pedal bracket. Thanks,
Rob

68GMCCustom · 05-05-2021, 09:42 PM

Hey Rob...I need one of these for my ‘68 with the Corvette pedal. Got one ready? I think I have your PayPal but send it to me just in case. Thanks in advance!
Posted via Mobile Device

**Hart_Rod** · 05-06-2021, 06:34 AM

Quote:

Originally Posted by 68GMCCustom

Hey Rob...I need one of these for my ‘68 with the Corvette pedal. Got one ready? I think I have your PayPal but send it to me just in case. Thanks in advance!
Posted via Mobile Device

Yes I do., robhartley@aol.com. Make sure you send your shipping address.

68GMCCustom · 05-06-2021, 11:58 AM

payment sent...thanks!

**Hart_Rod** · 05-06-2021, 05:07 PM

Quote:

Originally Posted by 68GMCCustom

payment sent...thanks!

Will ship tomorrow, thanks!

**Accelo** · 05-17-2021, 11:19 PM

I was under the impression the big impediment to using the Corvette pedal was you needed the Corvette TAC module to make it work. These are out of stock from GM and with only used ones available the price is about $400 each. This only applies to the Red and Blue connected computer. Later computers have the DBW built in. Maybe I am incorrect here. If someone has this setup working let me know. I went with a manual TB just to avoid this TAC pricing issue.

The down side of using a DBC is more complicated to get cruise control working than with a DBW setup.
Rick

**Hart_Rod** · 05-19-2021, 12:51 PM

Quote:

Originally Posted by Accelo

I was under the impression the big impediment to using the Corvette pedal was you needed the Corvette TAC module to make it work. These are out of stock from GM and with only used ones available the price is about $400 each. This only applies to the Red and Blue connected computer. Later computers have the DBW built in. Maybe I am incorrect here. If someone has this setup working let me know. I went with a manual TB just to avoid this TAC pricing issue.

The down side of using a DBC is more complicated to get cruise control working than with a DBW setup.
Rick

You have to be very careful with the pedals, you can't interchange them freely. The pedal "should" match the throttle body. With that being said, the 2005+ corvette pedal work with the GenIV Gold throttle bodies. GEN IV motors don't have separate TAC modules, it's built into the ECM. What year of motor do you have and what did it come out of?

EDIT: I found one on this site for $90: https://www.corvettemods.com/C6-Corv...iABEgKhofD_BwE

**Richard** · 05-30-2021, 03:06 AM

Sent PP.

**Hart_Rod** · 05-30-2021, 12:16 PM

Quote:

Originally Posted by Richard

Sent PP.

Got it, thanks! PM me your shipping address.

Ryan Hubbard · 03-06-2022, 12:08 AM

i sent you a paypal order for your pedal adapter last week. Did you receive it?

Received part right after I posted this. Thanks

itsmike2k · 09-01-2024, 07:45 PM

Doing a 23 GEN V Lt1 swap, does the bracket work with pedals for the newer LT1s? Putting parts together and don't have a pedal yet.. Let mw know, thanks!!

**Hart_Rod** · 09-27-2024, 03:54 PM

Quote:

Originally Posted by itsmike2k

Doing a 23 GEN V Lt1 swap, does the bracket work with pedals for the newer LT1s? Putting parts together and don't have a pedal yet.. Let mw know, thanks!!

Sorry I missed this. Do you have a picture of the pedal?

03-29-2021, 09:35 PM	#202
mtnbikerxt Registered User Join Date: Oct 2013 Location: Cheshire, CT Posts: 39	Re: DBW pedal mounting bracket Still selling the corvette pedal bracket for a '70 C10?

05-06-2021, 11:58 AM	#207
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: DBW pedal mounting bracket payment sent...thanks! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

05-17-2021, 11:19 PM	#209
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,280	Re: DBW pedal mounting bracket I was under the impression the big impediment to using the Corvette pedal was you needed the Corvette TAC module to make it work. These are out of stock from GM and with only used ones available the price is about $400 each. This only applies to the Red and Blue connected computer. Later computers have the DBW built in. Maybe I am incorrect here. If someone has this setup working let me know. I went with a manual TB just to avoid this TAC pricing issue. The down side of using a DBC is more complicated to get cruise control working than with a DBW setup. Rick

05-30-2021, 03:06 AM	#211
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,856	Re: DBW pedal mounting bracket Sent PP. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

03-06-2022, 12:08 AM	#213
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: DBW pedal mounting bracket i sent you a paypal order for your pedal adapter last week. Did you receive it? Received part right after I posted this. Thanks Last edited by Ryan Hubbard; 03-09-2022 at 11:45 PM.

05-05-2021, 09:42 PM	#205
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Hey Rob...I need one of these for my ‘68 with the Corvette pedal. Got one ready? I think I have your PayPal but send it to me just in case. Thanks in advance! Posted via Mobile Device

09-01-2024, 07:45 PM	#214
itsmike2k Registered User Join Date: Apr 2007 Location: Vegas Posts: 228	Re: DBW pedal mounting bracket Doing a 23 GEN V Lt1 swap, does the bracket work with pedals for the newer LT1s? Putting parts together and don't have a pedal yet.. Let mw know, thanks!! __________________ Mike 1972 LT1/4l60e Short Bed ART Front and Rear Strong Arms http://www.67-72chevytrucks.com/vboa...50#post2151750



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.