The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-11-2024, 09:17 AM   #1
cfan10
Registered User
 
cfan10's Avatar
 
Join Date: May 2011
Location: Texas
Posts: 981
Cool Alignment

Long story short, I was stuck in the yard in mud...paid my neighbor $30 to pull me out and it bent the tie rod pretty bad...$128 later that was fixed forgot to do a quick alignment and two month old tires are toast.

It's been literally like 7+years since I did this. Which way do the tie rods need to be turned foe toe in/toe out

As always advise is greatly appreciated. Thank you for your time.
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me.
Don't mess with my truck, my momma or my money...not necessarily in that order. ©
Stand for something or fall for anything.
[LIST][*]'98 Bourbon St. Brawl ©2010
cfan10 is offline   Reply With Quote
Old 08-11-2024, 09:20 AM   #2
cfan10
Registered User
 
cfan10's Avatar
 
Join Date: May 2011
Location: Texas
Posts: 981
Cool Re: Alignment

Cannot post photos but the driver front tire is slick underneath the car, and thread on the outside. Steering wheel is cocked to the driver wheel to drive straight
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me.
Don't mess with my truck, my momma or my money...not necessarily in that order. ©
Stand for something or fall for anything.
[LIST][*]'98 Bourbon St. Brawl ©2010
cfan10 is offline   Reply With Quote
Old 08-11-2024, 09:32 AM   #3
cfan10
Registered User
 
cfan10's Avatar
 
Join Date: May 2011
Location: Texas
Posts: 981
Re: Alignment

Photos
Attached Images
    
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me.
Don't mess with my truck, my momma or my money...not necessarily in that order. ©
Stand for something or fall for anything.
[LIST][*]'98 Bourbon St. Brawl ©2010
cfan10 is offline   Reply With Quote
Old 08-11-2024, 11:11 AM   #4
cfan10
Registered User
 
cfan10's Avatar
 
Join Date: May 2011
Location: Texas
Posts: 981
Re: Alignment

No one?
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me.
Don't mess with my truck, my momma or my money...not necessarily in that order. ©
Stand for something or fall for anything.
[LIST][*]'98 Bourbon St. Brawl ©2010
cfan10 is offline   Reply With Quote
Old 08-11-2024, 11:42 AM   #5
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,518
Re: Alignment

What do you have for steering on that? I see a box, but I also see what appears to be a tie rod end for rack and pinion. Also looks like camber is way off. Take it to an alignment shop and have it all checked out. What year is this?
kwmech is offline   Reply With Quote
Old Today, 10:35 AM   #6
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
Re: Alignment

The outer Tie Rod on the one side def looks bent.

Clean & put reference marks on the damaged tie rod where it threads into the rest of the linkage (measuring the exposed threads on the damaged part is usually easy enough; a piece of masking tape around the exposed threads works quick & dirty as well).
Remove the damaged part.
Install new part & thread it in as close to the dimension pulled off the one removed.
Reassemble.

For temporary alignment, put the steering wheel straight (which should put your non-damaged side pointing straight). Once that's done turn the turnbuckle in or out as needed to get the repaired side in a similar position as the non-damaged side.

Go get fresh tire/s & an alignment.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.

Last edited by SCOTI; Today at 10:40 AM.
SCOTI is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com