67 Camaro Build

[7dee2]

6x9s are mounted under the rear package tray with some slight modifications to these spacers that came with the speakers. Minimal modification to the car itself so we don’t create any rattles with the installation (like cutting big ol’ speaker holes in the tray).

[CAMAROBOY68SS]

slick speaker mounting. Still have the space for a factory rear window defogger if the car had it originally as well. What are you going to do the cardboard package tray on top to let the sound come through clean?

[7dee2]

Thanks, no rear window defogger. But yes, kind of, it’s a REM brand fiberboard style from Heartbeat City Camaro (link). I’ll post a pic of the backside next time I post and you can see the speaker openings.

https://www.heartbeatcitycamaro.com/...visions-Black/



I punched the hole for the backup light intermediate wiring harness. Also, fit the package tray cover (thinking it'll look pretty good), as well as the trunk divider around the mini-tubs. That black plastic thingy mounted in the trunk is what the bazooka sub mounts to you’ll see it in upcoming posts.

[Lost in the 60's]

I did the same with my '66 Chevelle rear tray. Mine has a lot more embossing around the speaker locations and a few hours of blending the spacers to them. I have a similar cover with the mesh that has perforations for the sound to come thru.

[7dee2]

I do like these covers, imo it looks cleaner with the speakers hidden.



A little 3M 90 Contact Adhesive sprayed on both sides finished up the package tray area.

[Lost in the 60's]

You're braver than me, gluing the cover on over the speaker fasteners. I plan on using double sided tape, in case I need to access the screws again. Probably not much different for removal, but that 3M adhesive doesn't let go, when applied correctly.