What did you do today not on your truck...

[Lost in the 60's]

Wow, yes, way more work than I would want to take on. Remove 6-8" of the solid ground behind that wall and replace with pea rock for better drainage.

[Boog]

I wonder if those tree roots won't push the wall out again.

[GOPAPA]

Originally Posted by D.B

Well, I wish I could help but I am already worn out just from looking at the picture.

I agree but now it's to late ,gotta finish it ,

Originally Posted by Ol Blue K20

X2!!

Ah ,,bet you do this all time .

Originally Posted by Getter-Done

Nice work.
thx and thx for flippin the photos

A flip for you.

Attachment 2369042

Attachment 2369043

Originally Posted by Boog

Larry, whoa. You are in much better health than me if you are the one doing all that work. I am a couple years younger than you but can no longer begin a job like that.

I wear a belt around my waist to lift these blocks and do not twist if I can help it .just now doing the foundation today and hopefully tomorrow set blocks

Lost in the 60ies ,, I will cut all roots off and there will be around 4-6 inches behind wall ..with gravel ,I agree with you

[72c20customcamper]

Started a new project . Needed a new shed the barn is good but everything gets filthy with pollen and dust as it’s really a hay barn the siding all has 1/2 gaps to let air circulate.

Got the floor joists done now I’ll move it to the 4x4 supports

[72c20customcamper]

Decking done. Pictures are deceiving the deck is dead nuts Level

[Boog]

Looks square n level to me.

I don't own a table saw and don't do much carpentry work these days anyway but I wonder if there is a jig so to speak to mount a 7" circular saw on to make long straight cuts like a table saw?

[72c20customcamper]

Originally Posted by Boog

Looks square n level to me.

I don't own a table saw and don't do much carpentry work these days anyway but I wonder if there is a jig so to speak to mount a 7" circular saw on to make long straight cuts like a table saw?

Yes there are many even home made ones
https://www.amazon.com/Kreg-KMA2700-...53681302&psc=1

They do make extension runners for longer than 50 inch .

[3757chevy]

Originally Posted by Getter-Done

Happy Anniversary.

I like those Japanese places.

Originally Posted by Lost in the 60's

Yes, congrats on the 44 years. Not a lot of people stay together that long anymore.

Scary to think if I was still with the first one, it would be coming up on 52...damn, that makes me feel old. I like the 32 with the "right one" better.

Thanks guys. We just got back from a week long trip and turned in our rental Jeep today. We went to Mesa Verde and Four Corners where we bought new Navajo made Bands to replace the rings we can't wear anymore. We drove over 1100 miles and got an average of 34 miles per gallon.

[Boog]

Originally Posted by 72c20customcamper

Yes there are many even home made ones
https://www.amazon.com/Kreg-KMA2700-...53681302&psc=1

They do make extension runners for longer than 50 inch .

That's what I'm talking about. And all these years I've done it the hard way I guess. I'd stake the board I wanted ripped to some saw horses and lay another one next to it then stake a guide board on top for the skillsaw. Thanks, I bookmarked Kreg.

[72c20customcamper]

Coming along