Re: Pilot bushing removal is no fun
Quote:
Originally Posted by 68OrangeSunshine;9328827]I made a ''Special Tool'' to remove Pilot Bearings from my 292 L6s. A notch is cut into some flat steel rod. [1/2'' x 1/8 '
The notch hooks the far end of the Bearing and you tap on the far end of the Tool -- bent 90* -- with a ball pein hammer, rotating the notch around the circle as you go.
For higher performance, press in a Pilot Bearing, not a bushing. Obviously you want the best grade US-made part you can get.
|
Pilot Bearing, yes! Been there and done that with bushings.
__________________
~Steven
'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper
Simi Valley, CA
|