![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,318
|
Door hinge captured nut
I had to cut the bottom bolt of the driver's side lower door hinge to get it off. When I was trying to back the bolt out, the captured nut inside the frame stretched the steel holding it in place, and the nut started to spin. So, I cut the bolt to get the door off so I could keep moving.
Now that I have the cab clean and home, I've been trying to get the remaining part of the bolt out. I am not having any success. My last attempt was to use a set of vise grips over the nut to try and hold it against the frame so it wouldn't move and use another vice grip to back the bolt out. All I succeeded in doing was stretch the steel capture some more when the nut still moved. Any ideas on how to get this bolt out? Thanks.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
Bookmarks |
|
|