Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-19-2024, 11:29 PM | #26 |
Registered User
Join Date: Dec 2001
Location: Manteca, Ca USA
Posts: 302
|
Re: Brake wizards needed - I'm about to go nuts!
bent axle or bad axle bearing
__________________
'71 Chevy 3/4 Ton Longbed '22 Chevy Tahoe RST '67 Firebird- 8 sec street car '19 Chevy CC 4x4 Duramax Dually |
05-20-2024, 11:22 AM | #27 | |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,342
|
Re: Brake wizards needed - I'm about to go nuts!
Quote:
First, I'd pull the shoes off that side and look at the pads were the shoes ride on the backing plates. Check the pads were the shoes ride for wear patterns that are in them. Take a flap wheel or grinding wheel or disk and smooth those off and put just a smear of grease on each one with your finger. It's a pain in the tail feathers but on things like this it is better to make one change at a time rather than try doing more than one.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
Bookmarks |
|
|