1964 C10 fleet side swb

[Justin71105]

Disc brakes mostly on, speedway kit went on pretty well.

Took awhile b/c the instructions are trash.

Had to use the included spacers since I am running the 67' axles and carrier, they are 1/2 wider than the stock 64 per side.

Fit well, instructions say to weld on the included hose bracket...kit does not come with this.

So ordered those and will finish it all up next week im off.

Need to weld on brackets to axle tube, then cut down hard lines and tie it togethor and bleed brakes.

Got E-brake adjusted and it works well, can't spin tire by hand at all. Release ebrake and it spins with a tiny drag. Will see how well they work after kts finished next week.