The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old Today, 05:03 PM   #24
Orange Crate
Registered User
 
Orange Crate's Avatar
 
Join Date: Feb 2011
Location: Under the Truck Dreaming
Posts: 693
Re: Dana 60 kingpin death wobble

Ya, even the engine looked like it was going to come out, hoe lee crap....trouble shooting suspension can be tough because you should take a look at it when it is on the ground (not on a lift) or if you have access to a four wheel lift the drive on kind THEN you have to have enough force to move things around. I had a knock sound on my other 4X4 and couldn't find the culprit, so I taped my phone to a really strong magnet and put it under the truck and drove around. Found it! the A arm bushings were toasted but I needed the full weight of the truck during braking to get it to show up. Maybe a 6 foot pole strapped to the wheel or something outrageous like that might have worked in the shop on the lift.
Maybe Redneck is under there right now.....
__________________
72 K20 Custom Camper, D60, 14BFF, full roller 406 TPI w custom built ECU and yes..it has tow hooks...
Orange Crate is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com