Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-05-2024, 11:02 AM | #201 |
Registered User
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 397
|
Re: My 1967 Chevy K20 Build Thread
Thanks Scott! It is getting there.
Clay
__________________
Clayton Sikes Peoria, Arizona 1967 Chevy K20 Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272 |
Today, 07:59 AM | #202 |
Registered User
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 397
|
Re: My 1967 Chevy K20 Build Thread
8/4/2024 - 8/12/2024
Final priming completed At this point, I believe that I have the body work on the truck about 98% complete. After applying a full 3 coats of Eastwood Urethane 2K Primer Surfacer on all components of the body, I am now to the final sanding stages before I can apply paint. This past weekend I fixed a flat spot that I found on the bed, and finished up the hood, cowl, and tailgate and then put everything on the frame to fully cure for the next 2 weeks or so. My plan at that point will be to work from the front to the back doing final sanding, fixing any blemishes that I missed and then paint. As far as paint goes, I have decided to go with TCP Global’s Restoration line of Acrylic Urethane. For the body, I will be going with “Grabber Blue” and will paint the cab “Championship White”. It is rewarding to finally see things coming together. I did get a bit of overspray on the panels during the priming, so after it was dry, I went over everything with a red scuff pad to knock it down and remove any nibs that were in it. It all gets sanded anyway, but that is the swirling that you see in the primer.
__________________
Clayton Sikes Peoria, Arizona 1967 Chevy K20 Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272 |
Today, 09:15 AM | #203 |
Senior Member
Join Date: Oct 2012
Location: Phx, AZ
Posts: 233
|
Re: My 1967 Chevy K20 Build Thread
Man that looks great sitting all bolted together looking like a complete truck!
__________________
Scott 1970 C10 LWB-->SWB Under Construction https://67-72chevytrucks.com/vboard/...d.php?t=847605 2014 2500HD DirtyMax|Daily Driver|Stock 2003 Tahoe Stock 1985 K5 5.3LS/4L60E|8Lug 4:56|3/4 Ton Front|14BFF Rear|Roll Cage|Dove-tailed & Bobbed |
Today, 09:18 AM | #204 | |
Registered User
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 397
|
Re: My 1967 Chevy K20 Build Thread
Quote:
Clay
__________________
Clayton Sikes Peoria, Arizona 1967 Chevy K20 Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272 |
|
Today, 09:26 AM | #205 |
Senior Member
Join Date: Oct 2012
Location: Phx, AZ
Posts: 233
|
Re: My 1967 Chevy K20 Build Thread
__________________
Scott 1970 C10 LWB-->SWB Under Construction https://67-72chevytrucks.com/vboard/...d.php?t=847605 2014 2500HD DirtyMax|Daily Driver|Stock 2003 Tahoe Stock 1985 K5 5.3LS/4L60E|8Lug 4:56|3/4 Ton Front|14BFF Rear|Roll Cage|Dove-tailed & Bobbed |
Today, 10:54 AM | #206 |
Senior Member
Join Date: Dec 1999
Location: TX
Posts: 1,568
|
Re: My 1967 Chevy K20 Build Thread
Looking good!
Not sure how the TCP global compares to the PPG Omni AU, but it should be fairly easy to lay down flat, and you can sand out imperfections and buff easily. |
Bookmarks |
|
|