While ripping apart the dash.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kixwy2 · 01-08-2008, 04:55 PM

...for the forth time this weekend, I discovered that the relay that controls the hazard lights is busted. Turn signals work just fine and at a good speed, but when I tested the hazard lights they sit there and do nothing, then rapid fire blink about 3x per second. Now what?

Anyone know how easy/hard this fix is? My hazards are on the steering column and for the most part it's in good shape. I checked the fuse and traced the wire into the steering column (when I couldn't see it anymore) and everything seemed to be ok...

Or do I just shine it because they DO actually work?

01-08-2008, 04:55 PM	#1
Kixwy2 Registered User Join Date: Dec 2007 Location: Central Coast, CA Posts: 177	While ripping apart the dash.. ...for the forth time this weekend, I discovered that the relay that controls the hazard lights is busted. Turn signals work just fine and at a good speed, but when I tested the hazard lights they sit there and do nothing, then rapid fire blink about 3x per second. Now what? Anyone know how easy/hard this fix is? My hazards are on the steering column and for the most part it's in good shape. I checked the fuse and traced the wire into the steering column (when I couldn't see it anymore) and everything seemed to be ok... Or do I just shine it because they DO actually work? __________________ 1974 GMC C-10; my new addiction 1998 4 Runner; daily driver

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.