Left Stepside Bedside Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ElGracho · 05-19-2003, 08:32 PM

I am looking for a left stepside bedside. Not the fender, the piece the fender bolts to.

I'm in Washington State.

BigRed · 05-20-2003, 10:58 AM

Is this what you're looking for.

http://cgi.ebay.com/ebaymotors/ws/eB...category=42611

stllookn · 05-20-2003, 07:44 PM

How about a complete stepside bed with shaved stake pockets, custom fabricated ends, no rust, tailgate and chrome steps for $550? The sides are the same for most earlier years too.

bigblock73 · 05-20-2003, 10:57 PM

or this...

http://cgi.ebay.com/ebaymotors/ws/eB...category=33655

BigRed · 05-21-2003, 11:42 AM

Jeff, that one on eBay looks like a good deal. But to ship something like that would break my bank.

I'm still on the lookout for a step bed, but one that is closer.

stllookn, wish you were closer.

ElGracho · 05-22-2003, 12:23 AM

Thanks for the help guys. The guy on ebay wants at least $200 for his, I can buy them locally for $350, so with shipping I don't know how good of a deal that is.

stllookn: are you interested in any trades, I have all kinds of parts and all but of a left bedside of a stepside bed...

I just don't know if I want to buy another whole one.

Jeff: That bed looks like mine did, I bet its not rust free in Kansas...

stllookn · 05-22-2003, 10:56 AM

Post this on the '67-'72 parts board since the stepsides are the same except for the fenders. I think they are the same all the way back to the late 50's. There is lots more activity on that parts board and you get some action there. I will keep looking for one on this side of the Sound.

BigRed · 05-23-2003, 08:49 AM

Quote:

Originally posted by stllookn
Post this on the '67-'72 parts board since the stepsides are the same except for the fenders. I think they are the same all the way back to the late 50's. There is lots more activity on that parts board and you get some action there. I will keep looking for one on this side of the Sound.

You brought up a good point I've been meaning to ask. What are the exact differences between the 67-72 and 73-87 step beds. If I was to buy a 67-72 bed, what would I have to do to install on my frame? Sounds like I would just need to swap fenders, right?

progress · 05-23-2003, 11:16 AM

That is correct, everything else is the same. Good luck finding a '67-'72 bed however because of the fenders...everyone wants them. Bedsides are much easier to come by. I believe the bedsides (box) is the same all the way back to 50's. Post the question on the '67 board and someone will answer pretty quickly. There is a guy in Medford, OR that is trying to sell a stepside bed for about $100. A bit of a drive but a great price! He is on this board...don't recall his name. I am going to Salem this weekend but am driving my one ton van or else he could throw it on top...LOL! They are pretty light once you remove the wood.

05-19-2003, 08:32 PM	#1
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,554	Left Stepside Bedside Wanted I am looking for a left stepside bedside. Not the fender, the piece the fender bolts to. I'm in Washington State. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '87 C10, '87 R30, 2 '89 R3500 Flatbeds

05-20-2003, 10:58 AM	#2
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Is this what you're looking for. http://cgi.ebay.com/ebaymotors/ws/eB...category=42611 __________________ Scott Shelbourne

05-20-2003, 07:44 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	How about a complete stepside bed with shaved stake pockets, custom fabricated ends, no rust, tailgate and chrome steps for $550? The sides are the same for most earlier years too. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

05-21-2003, 11:42 AM	#5
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Jeff, that one on eBay looks like a good deal. But to ship something like that would break my bank. I'm still on the lookout for a step bed, but one that is closer. stllookn, wish you were closer. __________________ Scott Shelbourne

05-22-2003, 12:23 AM	#6
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,554	Thanks for the help guys. The guy on ebay wants at least $200 for his, I can buy them locally for $350, so with shipping I don't know how good of a deal that is. stllookn: are you interested in any trades, I have all kinds of parts and all but of a left bedside of a stepside bed... I just don't know if I want to buy another whole one. Jeff: That bed looks like mine did, I bet its not rust free in Kansas... __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '87 C10, '87 R30, 2 '89 R3500 Flatbeds

05-20-2003, 10:57 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	or this... http://cgi.ebay.com/ebaymotors/ws/eB...category=33655

05-22-2003, 10:56 AM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Post this on the '67-'72 parts board since the stepsides are the same except for the fenders. I think they are the same all the way back to the late 50's. There is lots more activity on that parts board and you get some action there. I will keep looking for one on this side of the Sound. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

05-23-2003, 11:16 AM	#9
progress Gotta luv a clean shave Join Date: Jan 2002 Location: Kent, WA Posts: 226	That is correct, everything else is the same. Good luck finding a '67-'72 bed however because of the fenders...everyone wants them. Bedsides are much easier to come by. I believe the bedsides (box) is the same all the way back to 50's. Post the question on the '67 board and someone will answer pretty quickly. There is a guy in Medford, OR that is trying to sell a stepside bed for about $100. A bit of a drive but a great price! He is on this board...don't recall his name. I am going to Salem this weekend but am driving my one ton van or else he could throw it on top...LOL! They are pretty light once you remove the wood. __________________ Welding while you wait...you can help if you like and it...might even save you a little as long as you don't mess things up! We make house calls too...just like the old days!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.