Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
Yesterday, 08:53 AM | #1 |
Registered User
Join Date: Apr 2019
Location: SC
Posts: 68
|
Need some help with 67 C10 bed
Hey everyone
I have a 67 Shortbed that has a pristine bed on it-except for the bed floor. Someone along the line replaced the OEM floor with diamond plate. It’s done nicely as far as overall fitment (nothing was cut or changed from OEM fit), but I’ve already started to remove it because 1).- it’s extremely heavy and is not bolted down securely plus they shimmed areas with wood etc. 2.)- I’m going with a floor that allows me to use 13” tubs for my new custom 11” rims on the back. My main question is about the bed rails. The original rails are under the diamond plate, but they’re just sitting there. They aren’t welded to the floor, the bolts aren’t tight and are rusted, weird wood shims are in between them and the floor…it’s just a cluster under there. Several suppliers for the new bed floor are telling me the bed rails are welded on the new floor and I won’t need the old rails. Is this correct? Last edited by SilverGT3RS; Yesterday at 11:24 AM. |
Yesterday, 09:07 AM | #2 |
Senior Member
Join Date: Jan 2007
Location: Turlock, CA
Posts: 8,508
|
Re: Need some help with 67 C10 bed
Was it originally a wood or steel bed floor?
__________________
I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD |
Yesterday, 11:28 AM | #3 |
Registered User
Join Date: Apr 2019
Location: SC
Posts: 68
|
Re: Need some help with 67 C10 bed
I have no idea…..is there a way to tell?
If it did have a wood bed can I still replace the bed with the OEM metal floor? Last edited by SilverGT3RS; Yesterday at 12:13 PM. |
Yesterday, 04:19 PM | #4 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,966
|
Re: Need some help with 67 C10 bed
I think the wood and steel beds are the same. The reason I say that is because when I built my 68 I bought all after market bed parts. I could have gone metal but went with wood with the the box sides, front panel and wheel wells.
|
Bookmarks |
|
|