250 CID Rear Main Seal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nanook · 02-13-2023, 03:00 PM

I just developed a rear main seal leak on my 66 C10, (250 six cylinder) and I have been unable to locate any parts places that have the seal in stock.
Can anyone provide me with any leads as to where I could find one?
(I have called all the major chains and even called a few of the manufacturers with no luck.)
FelPro BS13241 or Victor JV728 are the part numbers that seem to be correct.

Any help would be greatly appreciated...

ACK · 02-13-2023, 06:42 PM

JEGS.com, SummitRacing.com, Amazon.com, and Auto Zone appear to have FelPro BS13241 in stock.

**cwcarpenter98** · 02-13-2023, 11:10 PM

Unless you need it yesterday, might be a good time to put together a whole list of seals and gaskets for your engine. Could be a good time to freshen it up with some new paint as well

Nanook · 02-14-2023, 12:19 PM

Thanks for the replies, but all the places that have been suggested have been contacted and even though they show that it is stocked it is not.

Yes...definitely time for a refresh....

Thanks for the responses.

ACK · 02-14-2023, 06:05 PM

Quote:

Originally Posted by Nanook

Thanks for the replies, but all the places that have been suggested have been contacted and even though they show that it is stocked it is not.

Yes...definitely time for a refresh....

Thanks for the responses.

This one might work and appears to be in stock ... link

Nanook · 02-15-2023, 12:25 PM

Thanks to all that have replied...Olson's Gaskets out of Port Orchard, Washington had the seal in stock and shipped yesterday. (Pricey but worth it.)

02-13-2023, 03:00 PM	#1
Nanook Registered User Join Date: Feb 2016 Location: Georgetown, TX and Bragg Creek, AB Posts: 173	250 CID Rear Main Seal I just developed a rear main seal leak on my 66 C10, (250 six cylinder) and I have been unable to locate any parts places that have the seal in stock. Can anyone provide me with any leads as to where I could find one? (I have called all the major chains and even called a few of the manufacturers with no luck.) FelPro BS13241 or Victor JV728 are the part numbers that seem to be correct. Any help would be greatly appreciated...

02-13-2023, 06:42 PM	#2
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 540	Re: 250 CID Rear Main Seal JEGS.com, SummitRacing.com, Amazon.com, and Auto Zone appear to have FelPro BS13241 in stock. __________________ My truck ain't dead, it just smells funny.

02-13-2023, 11:10 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,483	Re: 250 CID Rear Main Seal Unless you need it yesterday, might be a good time to put together a whole list of seals and gaskets for your engine. Could be a good time to freshen it up with some new paint as well __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-14-2023, 12:19 PM	#4
Nanook Registered User Join Date: Feb 2016 Location: Georgetown, TX and Bragg Creek, AB Posts: 173	Re: 250 CID Rear Main Seal Thanks for the replies, but all the places that have been suggested have been contacted and even though they show that it is stocked it is not. Yes...definitely time for a refresh.... Thanks for the responses.

02-15-2023, 12:25 PM	#6
Nanook Registered User Join Date: Feb 2016 Location: Georgetown, TX and Bragg Creek, AB Posts: 173	Re: 250 CID Rear Main Seal Thanks to all that have replied...Olson's Gaskets out of Port Orchard, Washington had the seal in stock and shipped yesterday. (Pricey but worth it.)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.