Replacement floor humps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1BadSS · 07-28-2004, 09:10 PM

The last owner I guess, cut the floor in my truck so he could use a floor shifter, I was wondering if the floor itself pulled out or what... Do they make patch panels for the floor?

Huskerboy2 · 07-28-2004, 11:41 PM

If he cut it in the normal area for a floor shifter, on the hump, you can just get a replacement hump. The hump just bolts in. You shouldn't have any trouble finding a used hump on this board.

Hmmmm, sorry guys, that last sentence didn't sound so good.

A few 72's · 07-29-2004, 12:55 AM

A couple more that may not sound to good...

two types of humps
Bolt in humps are the "high hump". "low hump" is part of the floor. Unknown if and how much trouble to make a high fit on a low.
"High hump" was on the 4WD trucks and on Big Block trucks. (May be a few other cases, but I think that is the main ones)

1BadSS · 07-29-2004, 01:01 AM

Quote:

Originally Posted by A few 72's

A couple more that may not sound to good...

two types of humps
Bolt in humps are the "high hump". "low hump" is part of the floor. Unknown if and how much trouble to make a high fit on a low.
"High hump" was on the 4WD trucks and on Big Block trucks. (May be a few other cases, but I think that is the main ones)

So the hump itself is bolt in...

stelth2002 · 07-29-2004, 01:14 AM

If you have a high hump then it bolts in, otherwise you have a low hump

1BadSS · 07-29-2004, 01:16 AM

Quote:

Originally Posted by stelth2002

If you have a high hump then it bolts in, otherwise you have a low hump

so i'm going to have to find a donor truck or what?

A few 72's · 07-29-2004, 02:09 AM

May take a picture of the damaged area and post it on the parts board. Some one may have a truck they are cutting up, and can get you a patch panel that you can trim and weld in place.
Here's a link for some high humps that are/were for sale. Did not read all to see if they were sold, but will let you see what a High hump looks like.
http://67-72chevytrucks.com/vboard/s....php3?t=111727

Huskerboy2 · 07-29-2004, 10:16 AM

Sorry guys. I had forgotten that the low humps were not bolt in. I have only owned 4 wheel drives.

cdowns · 07-29-2004, 12:21 PM

if it's a low hump and it's gotb a hole in it from a shifter just take a 18ga piece of metal and weld it in the hole, no real need for a special "patch panel" the slight crown on the metal can easily be duplicated using common hand tools

07-28-2004, 09:10 PM	#1
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Replacement floor humps The last owner I guess, cut the floor in my truck so he could use a floor shifter, I was wondering if the floor itself pulled out or what... Do they make patch panels for the floor? __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

07-28-2004, 11:41 PM	#2
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	If he cut it in the normal area for a floor shifter, on the hump, you can just get a replacement hump. The hump just bolts in. You shouldn't have any trouble finding a used hump on this board. Hmmmm, sorry guys, that last sentence didn't sound so good. __________________ '72 Chevy Blazer

07-29-2004, 12:55 AM	#3
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 703	A couple more that may not sound to good... two types of humps Bolt in humps are the "high hump". "low hump" is part of the floor. Unknown if and how much trouble to make a high fit on a low. "High hump" was on the 4WD trucks and on Big Block trucks. (May be a few other cases, but I think that is the main ones) __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

07-29-2004, 01:14 AM	#5
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	If you have a high hump then it bolts in, otherwise you have a low hump __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-29-2004, 02:09 AM	#7
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 703	May take a picture of the damaged area and post it on the parts board. Some one may have a truck they are cutting up, and can get you a patch panel that you can trim and weld in place. Here's a link for some high humps that are/were for sale. Did not read all to see if they were sold, but will let you see what a High hump looks like. http://67-72chevytrucks.com/vboard/s....php3?t=111727 __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

07-29-2004, 10:16 AM	#8
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Sorry guys. I had forgotten that the low humps were not bolt in. I have only owned 4 wheel drives. __________________ '72 Chevy Blazer

07-29-2004, 12:21 PM	#9
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	if it's a low hump and it's gotb a hole in it from a shifter just take a 18ga piece of metal and weld it in the hole, no real need for a special "patch panel" the slight crown on the metal can easily be duplicated using common hand tools __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.