hard starting edl. 1406

[roadking]

i've discussed this on the board a few time about my problem with hard starting with my new 1406. well i finally got a chance to pull the carb apart and noticed the floats were about a half inch off of factory spec. i followed my factory manuals advice on adjusting the floats. i got the carb put back on and set the ims with a vacuam gauge. the verdict: one pump with cold starts and starts right up and no more problems with hot starts. i know others were having this similer problems with there 1406. if you have a factory manual this is a easy procedure (i did it)