Grille Is Just About Done!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RON WOODGEARD · 10-12-2002, 10:44 AM

This has turned out to be a long job, mostly because I don't dedicate enough time to the truck, but hell,I've had it 12 or so years, so I'm in no hurry.
There is still some small dings in the lower portion where you can't see them, under the bumper. The polishing came out very well, It's a DIRTY job. I used a high speed 3/8 drill to turn the buff wheel. I used four different wheels, and four different compounds. I think I'm still going to go for the FINAL RED ROUGE with a SUPER SOFT MUSLUM wheel. I will probably still down the road buy a new outside grille shell and "MAYBE" do the same thing to it.
HERE's a shot of it.

RON

10-12-2002, 10:44 AM	#1
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Grille Is Just About Done!! This has turned out to be a long job, mostly because I don't dedicate enough time to the truck, but hell,I've had it 12 or so years, so I'm in no hurry. There is still some small dings in the lower portion where you can't see them, under the bumper. The polishing came out very well, It's a DIRTY job. I used a high speed 3/8 drill to turn the buff wheel. I used four different wheels, and four different compounds. I think I'm still going to go for the FINAL RED ROUGE with a SUPER SOFT MUSLUM wheel. I will probably still down the road buy a new outside grille shell and "MAYBE" do the same thing to it. HERE's a shot of it. RON Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.