billet cluster bezels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

willett · 01-13-2009, 03:24 PM

http://www.classicparts.com/1978-80-...tinfo/24-195B/

hey guys, i'm wondering what your supposed to do with your headlight and wiper switch if you put this puppy on the dash.

cochino12 · 01-13-2009, 03:28 PM

Quote:

Originally Posted by willett

http://www.classicparts.com/1978-80-...tinfo/24-195B/

hey guys, i'm wondering what your supposed to do with your headlight and wiper switch if you put this puppy on the dash.

that mounts above the headlight switch

willett · 01-13-2009, 03:37 PM

i know that,
but is it jjust a skin that goes over the bezel

or does it completly replace the bezel?

tvblazer78 · 01-13-2009, 03:57 PM

Dose this help...

cochino12 · 01-13-2009, 04:22 PM

Quote:

Originally Posted by willett

i know that,
but is it jjust a skin that goes over the bezel

or does it completly replace the bezel?

over bezel

Captkaos · 01-13-2009, 05:10 PM

FYI: I have that for about $30 less....
http://store.73-87chevytrucks.com/me...tegory_Code=7G

Moostifer · 01-13-2009, 05:52 PM

Quote:

Originally Posted by Captkaos

FYI: I have that for about $30 less....
http://store.73-87chevytrucks.com/me...tegory_Code=7G

Capt...

I think you and I are going to become very good friends once my tax refund comes in

87c10slammer · 01-13-2009, 06:22 PM

you and me both...lol ^

blu87 · 01-13-2009, 06:47 PM

Hey Capt is that a polished or satin finish?

willett · 01-13-2009, 08:55 PM

Quote:

Originally Posted by tvblazer78

Dose this help...

what did you do for the lower half there?

tvblazer78 · 01-13-2009, 09:16 PM

Quote:

Originally Posted by willett

what did you do for the lower half there?

A little work and glass

PhilaTruck · 01-13-2009, 10:19 PM

Nice work, TV!

tvblazer78 · 01-14-2009, 04:36 PM

Quote:

Originally Posted by PhilaTruck

Nice work, TV!

Thanks..

Captkaos · 01-15-2009, 02:42 PM

The ones I have are the satin finish.

sdavid · 01-15-2009, 06:29 PM

Are there polished out there or guys polishing the satin finish ones?

Captkaos · 01-15-2009, 06:51 PM

The ones I have listed are satin. Someone emailed me asking about the availibility of polished and I am checking tomorrow.

87Bob · 01-15-2009, 10:11 PM

Quote:

Originally Posted by tvblazer78

Dose this help...

Where did you get those billet levers for your column?

tvblazer78 · 01-15-2009, 10:18 PM

Quote:

Originally Posted by 87Bob

Where did you get those billet levers for your column?

Here you go...

http://www.billetspecialties.com/pro...cid=8&scid=111

Chris,

I polished mine, I could not find one that was polished that you could buy..

Trav

87Bob · 01-16-2009, 10:53 AM

Quote:

Originally Posted by tvblazer78

Here you go...

http://www.billetspecialties.com/pro...cid=8&scid=111

Chris,

I polished mine, I could not find one that was polished that you could buy..

Trav

Thanks!

Captkaos · 01-16-2009, 01:28 PM

Their answer was no, but he said he would call me back if he found out differently.

andrewmp6 · 01-17-2009, 03:43 AM

Polishing one won't be bad if you got a bench top grinder or use mothers ball thing that fits a drill.

Rollinsqrbdy · 01-17-2009, 11:39 AM

Quote:

Originally Posted by Moostifer

Capt...

I think you and I are going to become very good friends once my tax refund comes in

I wanna be his friend too. He's got some great deals.

jrsmith_2010 · 01-17-2009, 11:43 AM

i got all my interior billet benzel and dash insert from stylintrucks.com and they are polished billet aluminum

87Lowrider · 01-17-2009, 12:46 PM

Quote:

Originally Posted by Captkaos

The ones I have are the satin finish.

Chris, as soon as momma lifts the spending freeze

, I'm ordering one from you.

This spring the '87 gets an interior face lift and new OD trans before we take it through bama.

Ken

Captkaos · 01-19-2009, 05:33 PM

Ken,
CALL me if you drive through here...

01-13-2009, 03:24 PM	#1
willett Another Day, Another Dollar Join Date: Nov 2008 Location: North Vancouver, BC Posts: 1,316	billet cluster bezels? http://www.classicparts.com/1978-80-...tinfo/24-195B/ hey guys, i'm wondering what your supposed to do with your headlight and wiper switch if you put this puppy on the dash. __________________ -78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"

01-13-2009, 03:37 PM	#3
willett Another Day, Another Dollar Join Date: Nov 2008 Location: North Vancouver, BC Posts: 1,316	Re: billet cluster bezels? i know that, but is it jjust a skin that goes over the bezel or does it completly replace the bezel? __________________ -78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"

01-13-2009, 03:57 PM	#4
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: billet cluster bezels? Dose this help... Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

01-13-2009, 05:10 PM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: billet cluster bezels? FYI: I have that for about $30 less.... http://store.73-87chevytrucks.com/me...tegory_Code=7G __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-13-2009, 06:22 PM	#8
87c10slammer truck addict Join Date: Apr 2008 Location: levittown pa Posts: 154	Re: billet cluster bezels? you and me both...lol ^

01-13-2009, 06:47 PM	#9
blu87 Registered User Join Date: Jan 2008 Location: Pensacola Fl Posts: 270	Re: billet cluster bezels? Hey Capt is that a polished or satin finish? __________________ Gene

01-13-2009, 10:19 PM	#12
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Re: billet cluster bezels? Nice work, TV! __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!

01-15-2009, 02:42 PM	#14
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: billet cluster bezels? The ones I have are the satin finish. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-15-2009, 06:29 PM	#15
sdavid Registered User Join Date: Mar 2005 Location: Livingston, TX Posts: 56	Re: billet cluster bezels? Are there polished out there or guys polishing the satin finish ones? __________________ '81 C10 Stepside, SBC, T350, Wood Bed, and silverado options '87 K5 402 BBC, T350, 3.73s locked up, 2.5"Lift, 33x12.50x15s

01-15-2009, 06:51 PM	#16
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: billet cluster bezels? The ones I have listed are satin. Someone emailed me asking about the availibility of polished and I am checking tomorrow. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-16-2009, 01:28 PM	#20
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: billet cluster bezels? Their answer was no, but he said he would call me back if he found out differently. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-17-2009, 03:43 AM	#21
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: billet cluster bezels? Polishing one won't be bad if you got a bench top grinder or use mothers ball thing that fits a drill.

01-17-2009, 11:43 AM	#23
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: billet cluster bezels? i got all my interior billet benzel and dash insert from stylintrucks.com and they are polished billet aluminum __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-19-2009, 05:33 PM	#25
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: billet cluster bezels? Ken, CALL me if you drive through here... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.