wtt tpi east tn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 02-16-2009, 12:21 AM

i got a tpi from a 85 (old style angled intake bolts ) it came off a 305 i was told
most of the stock harness is there other wise its all there but a few bolts
i can get pics if needed $200 or trade
reply in post only please

stuff i need
msd 6al
4 core rad
left fender 67 chevy update got a left now need a right one
th350 working trans 4x4 or 2 wheel , i need both lol
fuel cell
stall for th350

**jaros44sr** · 02-16-2009, 07:14 AM

Quote:

Originally Posted by tnblazerk5

i got a tpi from a 85 (old style angled intake bolts ) it came off a 305 i was told
most of the stock harness is there other wise its all there but a few bolts
i can get pics if needed $200 or trade
reply in post only please

stuff i need
msd 6al
4 core rad
left fender 67 chevy
th350 working trans 4x4 or 2 wheel , i need both lol
fuel cell
stall for th350

Interested, will this bolt up to a 80ish 350. got pics?

49m · 02-16-2009, 08:29 AM

interested in the harnes

**tnblazerk5** · 02-16-2009, 02:48 PM

Quote:

Originally Posted by jaros44sr

Interested, will this bolt up to a 80ish 350. got pics?

if your center intake bolts are the old style angled , then yes it will fit , and i will get pics as soon as i can dig it all out

Quote:

Originally Posted by 49m

interested in the harnes

i would rather sale this as a whole sorry

**jaros44sr** · 02-16-2009, 04:28 PM

[QUOTE=tnblazerk5;3148122]if your center intake bolts are the old style angled , then yes it will fit , and i will get pics as soon as i can dig it all out

I'll check out the angle, thanks for your time.

**tnblazerk5** · 02-17-2009, 03:15 PM

pics

**jaros44sr** · 02-17-2009, 11:39 PM

All my intake manifold bolts are angled the same, are the mounting bolts on your intake all the same angle? Interested

**tnblazerk5** · 02-18-2009, 08:39 AM

Quote:

Originally Posted by jaros44sr

All my intake manifold bolts are angled the same, are the mounting bolts on your intake all the same angle? Interested

yes

BarryB · 02-18-2009, 08:51 AM

I have most of the stuff your asking for.
th 350 trans 2wd, 2500 rated stall, MSD 6al or 6a boxes. Have a 68 fender that has had the side marker hole welded in.
Let me know if Jaro passes, or if you want to come by and look at this stuff and possiblly purchase from me. I have other stuff you might be interested in.

vtblazer · 02-18-2009, 09:44 AM

Would the ECM need to be re-chipped to run a 350 correctly?

How about the injectors? They going to work with a 350 okay?

Any dings in the runners? They look good from the pics.

Thanks.

**tnblazerk5** · 02-18-2009, 01:31 PM

Quote:

Originally Posted by BarryB

I have most of the stuff your asking for.
th 350 trans 2wd, 2500 rated stall, MSD 6al or 6a boxes. Have a 68 fender that has had the side marker hole welded in.
Let me know if Jaro passes, or if you want to come by and look at this stuff and possiblly purchase from me. I have other stuff you might be interested in.

pm me a phone no# i need a bunch of stuff you got

Quote:

Originally Posted by vtblazer

Would the ECM need to be re-chipped to run a 350 correctly?

How about the injectors? They going to work with a 350 okay?

Any dings in the runners? They look good from the pics.

Thanks.

i know nothing about tpi's , i got this in a trade a few years ago and the runners i will have to go look at them and get better pics

jbristo67 · 02-18-2009, 02:09 PM

[quote=jaros44sr;3148278]

Quote:

Originally Posted by tnblazerk5

if your center intake bolts are the old style angled , then yes it will fit , and i will get pics as soon as i can dig it all out

I'll check out the angle, thanks for your time.

If you have center bolt valve covers it wont work if you dont it will. It will work on center bolt valve cover heads if you modify the intake

jbristo67 · 02-18-2009, 02:11 PM

Quote:

Originally Posted by vtblazer

Would the ECM need to be re-chipped to run a 350 correctly?

How about the injectors? They going to work with a 350 okay?

Any dings in the runners? They look good from the pics.

Thanks.

They will work ok but you will want at least 22# injectors to get out of your motor what you want. They can be had on ebay for a couple hundred dollars. 305 injectors are 19# If your motor is stock no need to re chip.

**jaros44sr** · 02-18-2009, 02:28 PM

[quote=jbristo67;3151848]

Quote:

Originally Posted by jaros44sr

If you have center bolt valve covers it wont work if you dont it will. It will work on center bolt valve cover heads if you modify the intake

Thanks for the reply, and info

jbristo67 · 02-18-2009, 03:52 PM

No prob man. If you have any more questions let me know.

**tnblazerk5** · 02-18-2009, 06:25 PM

[quote=jbristo67;3151848]

Quote:

Originally Posted by jaros44sr

If you have center bolt valve covers it wont work if you dont it will. It will work on center bolt valve cover heads if you modify the intake

Quote:

Originally Posted by jbristo67

They will work ok but you will want at least 22# injectors to get out of your motor what you want. They can be had on ebay for a couple hundred dollars. 305 injectors are 19# If your motor is stock no need to re chip.

Quote:

Originally Posted by jbristo67

No prob man. If you have any more questions let me know.

thanks for the help

gave ya rep points for it ?

a pic of the runners on the other side

sleeper67 · 02-19-2009, 09:56 AM

would you be willing to sell it? if so how much?

vtblazer · 02-19-2009, 10:33 AM

Quote:

Originally Posted by sleeper67

would you be willing to sell it? if so how much?

Quote:

Originally Posted by tnblazerk5

$200 or trade

I bet he might...

**tnblazerk5** · 02-19-2009, 03:32 PM

Quote:

Originally Posted by sleeper67

would you be willing to sell it? if so how much?

Quote:

Originally Posted by vtblazer

I bet he might...

hehehe you know me lol

jaros44sr ask bout this frist then BarryB then vtblazer then sleeper67
when or if jaros44sr pass on this it will go to the next in line i will give jacos44sr till tonite to pass or take it

**jaros44sr** · 02-19-2009, 04:36 PM

Quote:

Originally Posted by tnblazerk5

hehehe you know me lol

jaros44sr ask bout this frist then BarryB then vtblazer then sleeper67
when or if jaros44sr pass on this it will go to the next in line i will give jacos44sr till tonite to pass or take it

I'll pass, let Barry do some trading

**tnblazerk5** · 02-19-2009, 04:52 PM

Quote:

Originally Posted by jaros44sr

I'll pass, let Barry do some trading

next up BarryB

BarryB · 02-19-2009, 07:55 PM

Quote:

Originally Posted by tnblazerk5

next up BarryB

Hey, if somebody wants to buy it out right, don't let me stand in the way. I'm last in line here.
We can work somekind of other deal out . TnblazerK5 probably has something else I might be more interested in.

vtblazer · 02-20-2009, 06:22 AM

Pass

**tnblazerk5** · 02-23-2009, 03:40 PM

bump

02-16-2009, 12:21 AM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	wtt tpi east tn i got a tpi from a 85 (old style angled intake bolts ) it came off a 305 i was told most of the stock harness is there other wise its all there but a few bolts i can get pics if needed $200 or trade reply in post only please stuff i need msd 6al 4 core rad left fender 67 chevy update got a left now need a right one th350 working trans 4x4 or 2 wheel , i need both lol fuel cell stall for th350 Last edited by tnblazerk5; 02-18-2009 at 01:39 PM. Reason: forgot a few things lol

02-16-2009, 08:29 AM	#3
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: wtt tpi east tn interested in the harnes __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

02-16-2009, 04:28 PM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,840	Re: wtt tpi east tn [QUOTE=tnblazerk5;3148122]if your center intake bolts are the old style angled , then yes it will fit , and i will get pics as soon as i can dig it all out I'll check out the angle, thanks for your time. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-17-2009, 03:15 PM	#6
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: wtt tpi east tn pics Attached Images

02-17-2009, 11:39 PM	#7
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,840	Re: wtt tpi east tn All my intake manifold bolts are angled the same, are the mounting bolts on your intake all the same angle? Interested __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-18-2009, 08:51 AM	#9
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: wtt tpi east tn I have most of the stuff your asking for. th 350 trans 2wd, 2500 rated stall, MSD 6al or 6a boxes. Have a 68 fender that has had the side marker hole welded in. Let me know if Jaro passes, or if you want to come by and look at this stuff and possiblly purchase from me. I have other stuff you might be interested in. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

02-18-2009, 09:44 AM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: wtt tpi east tn Would the ECM need to be re-chipped to run a 350 correctly? How about the injectors? They going to work with a 350 okay? Any dings in the runners? They look good from the pics. Thanks.

02-18-2009, 03:52 PM	#15
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: wtt tpi east tn No prob man. If you have any more questions let me know. __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

02-19-2009, 09:56 AM	#17
sleeper67 i need money Join Date: Jan 2008 Location: Poquoson, Virginia Posts: 80	Re: wtt tpi east tn would you be willing to sell it? if so how much? __________________ 65 chevelle (12.40@108mph) 67 lwb c10 (work in progress) 85 ford crown vic p.o.s. (yeah it was free)

02-20-2009, 06:22 AM	#23
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: wtt tpi east tn Pass

02-23-2009, 03:40 PM	#24
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: wtt tpi east tn bump



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.