Are these pieces reproduced? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AustinBelair · 09-17-2009, 05:46 PM

The bottom of the inside bed panel? Where this is rusted out?

**Chevy Fleetside** · 09-17-2009, 06:25 PM

Here http://www.mar-k.com/what_s_new_at_mar-k.html near the bottom of the page.

ruffrida2005 · 09-17-2009, 06:26 PM

I was going to say the same thing, Alan just used those on 198's truck, Turned out really good.

joe231 · 09-17-2009, 07:55 PM

actually Alan made his own...

http://67-72chevytrucks.com/vboard/s...&postcount=219

*LILRED66* · 09-17-2009, 07:58 PM

I have made them before, but if you can get them from Mar-K, that is not a bad route to go. I have purchased the wheel well repair flanges and they are high quality, thick and fit really well.

AustinBelair · 09-17-2009, 09:10 PM

Wow, you guys rock!

I looked and looked and couldn't find any so I figured they weren't available. If they weren't, I was going to cut up another short fleetside bed I have to get those pieces.

ruffrida2005 · 09-17-2009, 09:30 PM

ok Joe you got me. It was other peices for the bed he bought.

What part of Austin are you from?

Alan's Classic · 09-17-2009, 10:12 PM

Quote:

Originally Posted by joe231

actually Alan made his own...

http://67-72chevytrucks.com/vboard/s...&postcount=219

Surprize, Surprize, Surprize. I'm impressed and I thought you only looked at the pics.

J/K

joe231 · 09-17-2009, 10:27 PM

Quote:

Originally Posted by Alan's Classic

Surprize, Surprize, Surprize. I'm impressed and I thought you only looked at the pics.

J/K

look down a couple posts and you will see that I'm the one who brought the Mar-K pieces to you attention

Alan's Classic · 09-18-2009, 07:35 AM

Quote:

Originally Posted by joe231

look down a couple posts and you will see that I'm the one who brought the Mar-K pieces to you attention

I know you were, I was trying to be funny.. I guess I will keep my day job.

joe231 · 09-18-2009, 09:10 AM

Come on now, I laughed didn't I?

AustinBelair · 09-18-2009, 03:03 PM

Quote:

Originally Posted by ruffrida2005

ok Joe you got me. It was other peices for the bed he bought.

What part of Austin are you from?

Me? I'm in South Austin.

MAR-Ktech · 09-19-2009, 10:36 PM

The Mar-K repair panels are 16 gage the same as the bedside originally. You can read the installation instructions for these panels if you want, they are here http://www.mar-k.com/installation_hints.html just scroll down to "bed side inner wall repair panel".

Mar-Ktech

09-17-2009, 05:46 PM	#1
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 300	Are these pieces reproduced? The bottom of the inside bed panel? Where this is rusted out? __________________ My mother is a recent cancer survivor and this truck build is for her

09-17-2009, 06:25 PM	#2
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,787	Re: Are these pieces reproduced? Here http://www.mar-k.com/what_s_new_at_mar-k.html near the bottom of the page. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

09-17-2009, 06:26 PM	#3
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Are these pieces reproduced? I was going to say the same thing, Alan just used those on 198's truck, Turned out really good. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

09-17-2009, 07:55 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Are these pieces reproduced? actually Alan made his own... http://67-72chevytrucks.com/vboard/s...&postcount=219 __________________ *CHEVY ONLY*

09-17-2009, 07:58 PM	#5
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Are these pieces reproduced? I have made them before, but if you can get them from Mar-K, that is not a bad route to go. I have purchased the wheel well repair flanges and they are high quality, thick and fit really well.

09-17-2009, 09:10 PM	#6
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 300	Re: Are these pieces reproduced? Wow, you guys rock! I looked and looked and couldn't find any so I figured they weren't available. If they weren't, I was going to cut up another short fleetside bed I have to get those pieces. __________________ My mother is a recent cancer survivor and this truck build is for her

09-17-2009, 09:30 PM	#7
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Are these pieces reproduced? ok Joe you got me. It was other peices for the bed he bought. What part of Austin are you from? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

09-18-2009, 09:10 AM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Are these pieces reproduced? Come on now, I laughed didn't I? __________________ *CHEVY ONLY*

09-19-2009, 10:36 PM	#13
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Re: Are these pieces reproduced? The Mar-K repair panels are 16 gage the same as the bedside originally. You can read the installation instructions for these panels if you want, they are here http://www.mar-k.com/installation_hints.html just scroll down to "bed side inner wall repair panel". Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.