MN 68 custom interior FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 02-12-2010, 10:08 PM

Just pulled this out of a 68 3/4 ton with the custom option. I believe this is the fawn color, someone correct me if i am wrong. I am going to try to sell the whole shot at once. Everything is in good driver condition. One seat belt has a frayed edge. The dash pad laid nice and flat but has a crack on the pass side that is almost hidden. Wouldn't be real noticable if repaired. The door panels are dirty, but no rips. Same with the arm rests. The escutcheons are broken of course. Visors and clips look good. Def. vents look fine and not broken. Seat belt boots look good also. $175 plus shipping for all.

**too much stuff** · 02-12-2010, 10:11 PM

Last of the pics...

IndyRich · 02-13-2010, 03:39 AM

Well I know you want to sell it all, but if not I'll pay $25 or $30 for the dash pad, I live in Indy.....let me know if it gets to that. Thank you Rich

**too much stuff** · 02-13-2010, 11:11 AM

If i can get enough interest in the other pieces, i may split it up. I will keep you in mind. Eric

alfeefish · 02-13-2010, 01:33 PM

How much for seatbelts,shipped to 37341?

kynimrod · 02-13-2010, 01:51 PM

I would go $30 on the door panels.
Shipping to 40222?

faribran · 02-13-2010, 02:02 PM

i would be interested in the visors, clips and hardware...pls advise how much to 36345

**too much stuff** · 02-13-2010, 10:50 PM

If in one wants it soon complete, i can divide it up. Lets see what tomorrow brings...

alfeefish · 02-14-2010, 03:13 PM

Ttt

**too much stuff** · 02-15-2010, 12:26 PM

OK, here is what we have. Dash pad, $30
Belts, $35
Visors and clips, $30
Door panels,$45
Arm rests, $20
Def vents, $15
I will figure a shipping price if still interested in the order the parts were asked about. The dash pad will probably go in a pvc tube with a cap on each end.

alfeefish · 02-15-2010, 12:32 PM

OK shipping to 37341 ?

IndyRich · 02-15-2010, 11:21 PM

OK the dash shipped to 46037

**too much stuff** · 02-16-2010, 04:18 PM

alfeefish. $10 for shipping
Indyrich, approx $20-$25 for shipping. If it is more than that i will eat it. That includes the price of the pvc pipe for shipping.
faribran, $15 shipping
kynimrod, figure $20 for shipping.
I think that is everyone. Thanks, Eric

alfeefish · 02-16-2010, 04:33 PM

OK paypal info?

kynimrod · 02-16-2010, 09:17 PM

Thanks,
but I will pass on the door panels

IndyRich · 02-17-2010, 12:30 AM

Ouch....$25 shipping is a little salty for a $30 item. I'll have to think about it. If you have another buyer go to them. If I want it, I'll see if you still have it.

**too much stuff** · 02-17-2010, 01:36 AM

Quote:

Originally Posted by IndyRich

Ouch....$25 shipping is a little salty for a $30 item. I'll have to think about it. If you have another buyer go to them. If I want it, I'll see if you still have it.

If you have any ideas, let me know. I'm game to help out.

*sharpie1972* · 02-17-2010, 01:44 AM

Shipping on a 4 ft. item does get a little spicy... um I mean pricey! I just gave $16 to ship a set of $25 visors(shipping included) Tough to walk with $9 cash on nice parts and have someone tell you price is too high. UPS is the big winner on these deals! Sharpie

Trip59 · 02-17-2010, 02:03 AM

Interested in the door panels if there's steel under there (there is, right?) $45 plus shipping to 32068 comes to...? or is that $45 shipped?

Trip

**too much stuff** · 02-17-2010, 09:03 AM

Quote:

Originally Posted by Trip59

Interested in the door panels if there's steel under there (there is, right?) $45 plus shipping to 32068 comes to...? or is that $45 shipped?

Trip

Yes, the metal looks fine underneath. Shipping is $20.
Eric

Trip59 · 02-17-2010, 11:21 AM

Definitely want the panels, PM sent!

Trip

**too much stuff** · 02-17-2010, 08:33 PM

Seat belts sold and door panels are pending. Eric

dan42 · 02-17-2010, 11:13 PM

Do you have a close up on the visors? Mine are separating at the seam, and I could use a little better pair.

**too much stuff** · 02-18-2010, 12:31 AM

Quote:

Originally Posted by dan42

Do you have a close up on the visors? Mine are separating at the seam, and I could use a little better pair.

I will look at them tomorrow. I think they are nice. Eric

**too much stuff** · 02-20-2010, 10:47 AM

Door panels are sold.
dan42, the visors look really good on the stitching. The small clips on the corners have light rusting on them. The visor clips look fine. If you want pics, i can try for tomorrow. Eric

02-12-2010, 10:08 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	68 custom interior FS Just pulled this out of a 68 3/4 ton with the custom option. I believe this is the fawn color, someone correct me if i am wrong. I am going to try to sell the whole shot at once. Everything is in good driver condition. One seat belt has a frayed edge. The dash pad laid nice and flat but has a crack on the pass side that is almost hidden. Wouldn't be real noticable if repaired. The door panels are dirty, but no rips. Same with the arm rests. The escutcheons are broken of course. Visors and clips look good. Def. vents look fine and not broken. Seat belt boots look good also. $175 plus shipping for all. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-12-2010, 10:11 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS Last of the pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-13-2010, 03:39 AM	#3
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: 68 custom interior FS Well I know you want to sell it all, but if not I'll pay $25 or $30 for the dash pad, I live in Indy.....let me know if it gets to that. Thank you Rich

02-13-2010, 11:11 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS If i can get enough interest in the other pieces, i may split it up. I will keep you in mind. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-13-2010, 01:33 PM	#5
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: 68 custom interior FS How much for seatbelts,shipped to 37341?

02-13-2010, 01:51 PM	#6
kynimrod Registered User Join Date: Sep 2009 Location: Louisville KY Posts: 18	Re: 68 custom interior FS I would go $30 on the door panels. Shipping to 40222?

02-13-2010, 02:02 PM	#7
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 68 custom interior FS i would be interested in the visors, clips and hardware...pls advise how much to 36345 __________________ "

02-13-2010, 10:50 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS If in one wants it soon complete, i can divide it up. Lets see what tomorrow brings... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-14-2010, 03:13 PM	#9
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: 68 custom interior FS Ttt

02-15-2010, 12:26 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS OK, here is what we have. Dash pad, $30 Belts, $35 Visors and clips, $30 Door panels,$45 Arm rests, $20 Def vents, $15 I will figure a shipping price if still interested in the order the parts were asked about. The dash pad will probably go in a pvc tube with a cap on each end. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-15-2010, 12:32 PM	#11
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: 68 custom interior FS OK shipping to 37341 ?

02-15-2010, 11:21 PM	#12
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: 68 custom interior FS OK the dash shipped to 46037

02-16-2010, 04:18 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS alfeefish. $10 for shipping Indyrich, approx $20-$25 for shipping. If it is more than that i will eat it. That includes the price of the pvc pipe for shipping. faribran, $15 shipping kynimrod, figure $20 for shipping. I think that is everyone. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-16-2010, 04:33 PM	#14
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: 68 custom interior FS OK paypal info?

02-16-2010, 09:17 PM	#15
kynimrod Registered User Join Date: Sep 2009 Location: Louisville KY Posts: 18	Re: 68 custom interior FS Thanks, but I will pass on the door panels



Register or Log In To remove these advertisements.

02-17-2010, 12:30 AM	#16
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: 68 custom interior FS Ouch....$25 shipping is a little salty for a $30 item. I'll have to think about it. If you have another buyer go to them. If I want it, I'll see if you still have it.

02-17-2010, 01:44 AM	#18
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 68 custom interior FS Shipping on a 4 ft. item does get a little spicy... um I mean pricey! I just gave $16 to ship a set of $25 visors(shipping included) Tough to walk with $9 cash on nice parts and have someone tell you price is too high. UPS is the big winner on these deals! Sharpie Last edited by sharpie1972; 02-17-2010 at 10:31 AM.

02-17-2010, 02:03 AM	#19
Trip59 Who needs sleep... Join Date: Aug 2009 Location: Middleburg, Florida Posts: 260	Re: 68 custom interior FS Interested in the door panels if there's steel under there (there is, right?) $45 plus shipping to 32068 comes to...? or is that $45 shipped? Trip

02-17-2010, 11:21 AM	#21
Trip59 Who needs sleep... Join Date: Aug 2009 Location: Middleburg, Florida Posts: 260	Re: 68 custom interior FS Definitely want the panels, PM sent! Trip

02-17-2010, 08:33 PM	#22
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS Seat belts sold and door panels are pending. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-17-2010, 11:13 PM	#23
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 68 custom interior FS Do you have a close up on the visors? Mine are separating at the seam, and I could use a little better pair. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

02-20-2010, 10:47 AM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 68 custom interior FS Door panels are sold. dan42, the visors look really good on the stitching. The small clips on the corners have light rusting on them. The visor clips look fine. If you want pics, i can try for tomorrow. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.