show us your gages - The 1947 - Present Chevrolet & GMC Truck Message Board Network

srea76 · 01-30-2010, 11:46 AM

I'm thinking of ordering a set of the white gauges on ebay. Curious if anyone has a pic with them installed. I would also like to see other options. THANKS!

cdowns · 01-30-2010, 12:09 PM

gauges

Longhorn Man · 01-30-2010, 01:21 PM

my burb;

1-PU70 · 01-30-2010, 03:57 PM

Heres mine.

MESS-HALL · 01-30-2010, 04:00 PM

Nice buddies!! Luve the green.

Mudder · 01-30-2010, 04:37 PM

This was pretty easy.

big mike71 · 01-30-2010, 05:52 PM

Quote:

Originally Posted by 1-PU70

Heres mine.

Where did you get that steering wheel? It's a good looking wheel.

ironhill · 01-30-2010, 07:16 PM

Here are my white face gauges for my '68. They are the ones off ebay. I really like how they turned out.

srea76 · 01-30-2010, 07:22 PM

yeah they look good. Just wondered what they look like in dash. He is selling some now with clock also.

ironhill · 01-30-2010, 07:30 PM

Here is a couple pics of it in the truck. I like how it looks with the a/c, heater controller in matching white. Makes it look more like its suppose to be white

FRENCHBLUE72 · 01-30-2010, 08:20 PM

Ironhill do you have a build thread or more pics posted somewhere?

ironhill · 01-30-2010, 08:24 PM

FRENCHBLUE72 I don't have a build thread going, but I probably should, how do I get one going? I have tons of pics but they are all about 2mb in size so I would have to downsize them all right??

BAGNDRAGIT · 01-30-2010, 08:55 PM

Here are mine, crappy cell phone pic, the bezel is white and the are autometer sport comps.

OhioDan · 01-31-2010, 05:46 AM

These are in my 70 GMC. Hope this is what your looking for?

68_chop_top · 01-31-2010, 09:26 AM

here are mine

1-PU70 · 01-31-2010, 10:56 AM

Big Mike I think its a Grant.

**passthebuck** · 01-31-2010, 11:12 AM

This is mine. It's installed & working but unpainted/polished. I have blue led's in it, but i might go yellow later on...

john02fxdl · 01-31-2010, 11:16 AM

Here are mine

adpostel · 01-31-2010, 11:19 AM

Here's what mine look like.....

adpostel · 01-31-2010, 11:21 AM

FWIW, I like "passthebuck" setup the best.......

crewcab67 · 01-31-2010, 06:27 PM

here are mine they are for my duramax conversion that i am doing thay are all new. I shoud get them in a week or so. they should be finished this week and mailed

big mike71 · 01-31-2010, 07:24 PM

Quote:

Originally Posted by 1-PU70

Big Mike I think its a Grant.

Thanks

mike nutt · 01-31-2010, 08:42 PM

here's mine .

roughedup72 · 01-31-2010, 10:31 PM

crewcab67 do you have a build trhead going on your duramax conversion. Thats one kick ass looking guage also.

COACHMEASON · 01-31-2010, 11:02 PM

Quote:

Originally Posted by crewcab67

here are mine they are for my duramax conversion that i am doing thay are all new. I shoud get them in a week or so. they should be finished this week and mailed

That is awesome...More pics and how it was done with what..!!

01-30-2010, 11:46 AM	#1
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	show us your gages I'm thinking of ordering a set of the white gauges on ebay. Curious if anyone has a pic with them installed. I would also like to see other options. THANKS! Last edited by srea76; 01-30-2010 at 12:43 PM.

01-30-2010, 12:09 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: show us your gages gauges __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-30-2010, 01:21 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: show us your gages my burb;

01-30-2010, 03:57 PM	#4
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Re: show us your gages Heres mine. Attached Images __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

01-30-2010, 04:00 PM	#5
MESS-HALL Registered User Join Date: Nov 2009 Location: Goshen, AR Posts: 150	Re: show us your gages Nice buddies!! Luve the green. __________________ GROVE STREET CUSTOMS est. 2005 67' C10 LWB/350/T400 69' C10 SWB/454/T400 71' C10 LWB/383/ 72' C10 SWB/350/T350 15' Crew Silverado/6.2

01-30-2010, 04:37 PM	#6
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: show us your gages This was pretty easy. Attached Images

01-30-2010, 07:16 PM	#8
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: show us your gages Here are my white face gauges for my '68. They are the ones off ebay. I really like how they turned out. Attached Images

01-30-2010, 07:22 PM	#9
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: show us your gages yeah they look good. Just wondered what they look like in dash. He is selling some now with clock also.

01-30-2010, 07:30 PM	#10
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: show us your gages Here is a couple pics of it in the truck. I like how it looks with the a/c, heater controller in matching white. Makes it look more like its suppose to be white Attached Images

01-30-2010, 08:20 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: show us your gages Ironhill do you have a build thread or more pics posted somewhere? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-30-2010, 08:24 PM	#12
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: show us your gages FRENCHBLUE72 I don't have a build thread going, but I probably should, how do I get one going? I have tons of pics but they are all about 2mb in size so I would have to downsize them all right??

01-30-2010, 08:55 PM	#13
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: show us your gages Here are mine, crappy cell phone pic, the bezel is white and the are autometer sport comps. __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

01-31-2010, 05:46 AM	#14
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: show us your gages These are in my 70 GMC. Hope this is what your looking for? Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

01-31-2010, 09:26 AM	#15
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: show us your gages here are mine __________________ Mine is chopped, has a clutch, and a big block.

01-31-2010, 10:56 AM	#16
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Re: show us your gages Big Mike I think its a Grant. __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters



Register or Log In To remove these advertisements.

01-31-2010, 11:12 AM	#17
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: show us your gages This is mine. It's installed & working but unpainted/polished. I have blue led's in it, but i might go yellow later on... Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-31-2010, 11:16 AM	#18
john02fxdl Registered User Join Date: Oct 2008 Location: Avondale, PA. South east corner of the state Posts: 75	Re: show us your gages Here are mine Attached Images __________________ When I grow up, I want to be the man my wife married. I used to be schitzophrenic, but we're O.K. now

01-31-2010, 11:19 AM	#19
adpostel New Member Join Date: Jul 2006 Location: Houston, TX Posts: 132	Re: show us your gages Here's what mine look like..... Attached Images __________________ 1968 C10 LWB Project 454/400 http://www.cardomain.com/ride/2417713

01-31-2010, 11:21 AM	#20
adpostel New Member Join Date: Jul 2006 Location: Houston, TX Posts: 132	Re: show us your gages FWIW, I like "passthebuck" setup the best....... __________________ 1968 C10 LWB Project 454/400 http://www.cardomain.com/ride/2417713

01-31-2010, 06:27 PM	#21
crewcab67 Registered User Join Date: Aug 2007 Location: vancouver WA Posts: 195	Re: show us your gages here are mine they are for my duramax conversion that i am doing thay are all new. I shoud get them in a week or so. they should be finished this week and mailed Attached Images

01-31-2010, 08:42 PM	#23
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: show us your gages here's mine . Attached Images

01-31-2010, 10:31 PM	#24
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: show us your gages crewcab67 do you have a build trhead going on your duramax conversion. Thats one kick ass looking guage also. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

Register or Log In To remove these advertisements.