TX 1972 Chevy swb bare frame $200 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 11-28-2009, 08:54 PM

1972 Chevy swb bare frame. The only thing on it is the coil springs and rear control arms, three of the four front bumper brackets, 6 cylinder crossmember, front bed mounts for a fleetside bed, rear trailing arms and rear shock to rear axle mount pads. No front suspension. I checked it with a tape measure and it is square. $200

**WIDESIDE72** · 02-13-2010, 12:34 PM

ttt

Chevyguy111786 · 02-26-2010, 10:59 AM

This still available? Come down on price at all? I'm in McKinney, north of Dallas, but a weekend trip to austin wouldn't be bad....

**WIDESIDE72** · 02-26-2010, 07:35 PM

Stilll available

JimKshortstep4x4 · 02-26-2010, 08:18 PM

Good looking frame! We don't normally see frames like that in Michigan.

TTT

Jim

**WIDESIDE72** · 03-13-2010, 01:09 AM

ttt

**WIDESIDE72** · 03-22-2010, 09:42 PM

ttt

**WIDESIDE72** · 05-16-2010, 12:36 PM

ttt

chevytruckluver · 06-14-2010, 10:35 PM

do you still have the frame?

**WIDESIDE72** · 06-15-2010, 01:24 PM

Stilll available

Zoomin · 06-15-2010, 09:08 PM

How heavy is it? Can two people move it?

**WIDESIDE72** · 06-15-2010, 10:02 PM

One person (me) moved it to where it sits... with a tractor and front end loader.

I am confident two able bodied men could move it by hand. Bring someone with you if that is what you want to do.

I planned t use the tractor to load it for the new owner.

**WIDESIDE72** · 07-16-2010, 06:27 PM

Ttt

**WIDESIDE72** · 08-14-2010, 11:31 AM

Still available, trying to get the $200 I paid for it. Seriously, noone wants this thing??? If i can't get the $200 I want for it, I am thinking of having it blasted and painted and putting the 72 5 lug front and rear suspension I have out of a lwb truck under it. I am sure it would be worth a little more then.

copywritten · 08-14-2010, 01:39 PM

PM sent

**WIDESIDE72** · 08-15-2010, 11:30 AM

The frame is not bent or tweaked and there is nothing other than surace rust. The P.O. stripped all of the components off, so it is ready to go to the sandblaster (or you could clean it up with a wire or flapper wheel f you are more ambitious than me).

Jparks · 08-23-2010, 03:17 PM

Just to clear things up, the only problem with the frame is surface rust?

Jparks · 08-23-2010, 03:18 PM

I'll be in Lakeway the weekend of Sept 11 and I would like to come take a look if it's still available then.

**WIDESIDE72** · 08-23-2010, 10:22 PM

Quote:

Originally Posted by Jparks

I'll be in Lakeway the weekend of Sept 11 and I would like to come take a look if it's still available then.

I have a potential swap including the frame currently pending. I am not sure if the swap will occur before Sept 11th or not. It is a done deal other than the actual transfer of the items. The only hitch is me getting the frame to the potential buyer, which includes the involvement of my brother in Ft Worth

**WIDESIDE72** · 12-19-2010, 12:50 AM

Sold

11-28-2009, 08:54 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	1972 Chevy swb bare frame $200 1972 Chevy swb bare frame. The only thing on it is the coil springs and rear control arms, three of the four front bumper brackets, 6 cylinder crossmember, front bed mounts for a fleetside bed, rear trailing arms and rear shock to rear axle mount pads. No front suspension. I checked it with a tape measure and it is square. $200 Attached Images Last edited by WIDESIDE72; 07-18-2010 at 09:41 AM.

02-13-2010, 12:34 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 ttt

02-26-2010, 10:59 AM	#3
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Re: 1972 Chevy swb bare frame $200 This still available? Come down on price at all? I'm in McKinney, north of Dallas, but a weekend trip to austin wouldn't be bad....

02-26-2010, 07:35 PM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 Stilll available

02-26-2010, 08:18 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: 1972 Chevy swb bare frame $200 Good looking frame! We don't normally see frames like that in Michigan. TTT Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

03-13-2010, 01:09 AM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 ttt

03-22-2010, 09:42 PM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 ttt

05-16-2010, 12:36 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 ttt

06-14-2010, 10:35 PM	#9
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: 1972 Chevy swb bare frame $200 do you still have the frame?

06-15-2010, 01:24 PM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 Stilll available

06-15-2010, 09:08 PM	#11
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1972 Chevy swb bare frame $200 How heavy is it? Can two people move it?

06-15-2010, 10:02 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 One person (me) moved it to where it sits... with a tractor and front end loader. I am confident two able bodied men could move it by hand. Bring someone with you if that is what you want to do. I planned t use the tractor to load it for the new owner.

07-16-2010, 06:27 PM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 Ttt

08-14-2010, 11:31 AM	#14
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 Still available, trying to get the $200 I paid for it. Seriously, noone wants this thing??? If i can't get the $200 I want for it, I am thinking of having it blasted and painted and putting the 72 5 lug front and rear suspension I have out of a lwb truck under it. I am sure it would be worth a little more then.

08-14-2010, 01:39 PM	#15
copywritten CopyWritten Join Date: Dec 2007 Location: Cypress TX Posts: 173	Re: 1972 Chevy swb bare frame $200 PM sent



Register or Log In To remove these advertisements.

08-15-2010, 11:30 AM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 The frame is not bent or tweaked and there is nothing other than surace rust. The P.O. stripped all of the components off, so it is ready to go to the sandblaster (or you could clean it up with a wire or flapper wheel f you are more ambitious than me).

08-23-2010, 03:17 PM	#17
Jparks Registered User Join Date: Aug 2010 Location: Nederland, TX Posts: 429	Re: 1972 Chevy swb bare frame $200 Just to clear things up, the only problem with the frame is surface rust? __________________ 72 SWB - Porterbuilt Front/Rear, 22's, 496bbc - "Outkast" 68 Stepside - Porterbuilt Coilover Chassis, 22's, LS3 - "Badfinger"

08-23-2010, 03:18 PM	#18
Jparks Registered User Join Date: Aug 2010 Location: Nederland, TX Posts: 429	Re: 1972 Chevy swb bare frame $200 I'll be in Lakeway the weekend of Sept 11 and I would like to come take a look if it's still available then. __________________ 72 SWB - Porterbuilt Front/Rear, 22's, 496bbc - "Outkast" 68 Stepside - Porterbuilt Coilover Chassis, 22's, LS3 - "Badfinger"

12-19-2010, 12:50 AM	#20
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 Chevy swb bare frame $200 Sold

Register or Log In To remove these advertisements.