has anyone tried to epoxy on the back part of a out side door handle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 02-24-2012, 04:24 PM

I have an NOS outside drivers doorhandle but someone has tried to take the button part off and they have broken the tabs and put the little metal piece in the wrong way , i am thinking about popping it out and turning it the right way and then trying to use some epoxy to glue it back together ? any thoughts on this ?

**chewychevy67** · 02-24-2012, 05:10 PM

i had my 67 originals replated and used epoxy on the rear. I havent got them on my truck yet. its waiting for paint. I did this about 2 years ago and they are still holding now but well see when i put them to use.

**71blksuper4x4** · 02-24-2012, 06:46 PM

On my first truck, we used JB weld. Just gobbed it on. It held fine for a couple years of daily use. Trevor

67swb72klb · 02-24-2012, 07:03 PM

u dont have anything to loose just prep it up and clean real good maybe u could do somthing with the spring they are prety stout good luck

02-24-2012, 04:24 PM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	has anyone tried to epoxy on the back part of a out side door handle I have an NOS outside drivers doorhandle but someone has tried to take the button part off and they have broken the tabs and put the little metal piece in the wrong way , i am thinking about popping it out and turning it the right way and then trying to use some epoxy to glue it back together ? any thoughts on this ? Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-24-2012, 05:10 PM	#2
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,592	Re: has anyone tried to epoxy on the back part of a out side door handle i had my 67 originals replated and used epoxy on the rear. I havent got them on my truck yet. its waiting for paint. I did this about 2 years ago and they are still holding now but well see when i put them to use.

02-24-2012, 06:46 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: has anyone tried to epoxy on the back part of a out side door handle On my first truck, we used JB weld. Just gobbed it on. It held fine for a couple years of daily use. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-24-2012, 07:03 PM	#4
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,478	Re: has anyone tried to epoxy on the back part of a out side door handle u dont have anything to loose just prep it up and clean real good maybe u could do somthing with the spring they are prety stout good luck __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.