IN AWESOME!! Restored Tach Tin setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 03-03-2012, 01:48 AM

This has been blasted and repainted ALL gauge mounting tins and outer tach tin. Repainted needles, repainted whites on bottom gauge mount tins. Took off each gauge face and cleaned an polished. Reset speedometer to 000000. Just look at the pics folks.

$200 ALL GAUGES WORK AND WERE TESTED

Will now include new AAW tach harness all for $225 shipped. All you will need is lens, front tin, and bezel and you will have you a VERY!!!! nice all original gauge setup for around $375 dollars total!!!!
please ask questions

Oh yeah might add these are all originals

HeavyMetalChevy · 03-03-2012, 01:51 AM

more. The oil gauge can be swapped if the light rust scale on bottom is bothersome. It will never be seen though

shawno72 · 03-03-2012, 01:53 AM

Hold onto this and after April I will buy it. Man this looks nice wish I wasn't saving for Disneyland.
Posted via Mobile Device

HeavyMetalChevy · 03-03-2012, 01:54 AM

This lovely speedometer!!!!!!!!!!

HeavyMetalChevy · 03-03-2012, 01:57 AM

Quote:

Originally Posted by shawno72

Hold onto this and after April I will buy it. Man this looks nice wish I wasn't saving for Disneyland.
Posted via Mobile Device

I will have plenty more my friend!!! I would restore them all completely but the demand is not very high it seems and I do not wan to buy tach tins to nfinish when I could just finally buy my press and start making my own. So I figured i would do the tedious work for fellas and I am also going to start restoring individual gauges and selling them separate.

HeavyMetalChevy · 03-03-2012, 02:02 AM

I see you viewing... I knows ya' want it... reasonable offer always welcome

HeavyMetalChevy · 03-03-2012, 05:32 AM

ttt

Cruisin' Oklahoma · 03-03-2012, 09:20 AM

Good deal but I have a non tach bezel...
Posted via Mobile Device

skrenly · 03-03-2012, 09:56 PM

I will go 150 shipped. Thanks for your consideration.
Steve

dan42 · 03-04-2012, 12:05 AM

Will that tach work with HEI?

VA72C10 · 03-04-2012, 12:07 AM

Quote:

Originally Posted by dan42

Will that tach work with HEI?

It should. I've heard a few people use filters to use factory tachs with HEI, but most just use the stock tach with HEI with no problem...

HeavyMetalChevy · 03-04-2012, 12:19 AM

Quote:

Originally Posted by VA72C10

It should. I've heard a few people use filters to use factory tachs with HEI, but most just use the stock tach with HEI with no problem...

Thanks for chiming in Jonathan

HeavyMetalChevy · 03-04-2012, 12:23 AM

Quote:

Originally Posted by Cruisin' Oklahoma

Good deal but I have a non tach bezel...
Posted via Mobile Device

Member 70shortfleet might make you some tach tins. He has helped other members as well!

HeavyMetalChevy · 03-04-2012, 11:20 AM

ttt

dan42 · 03-04-2012, 12:39 PM

Do all the gauges work? And are they repos or OEM?
Posted via Mobile Device

HeavyMetalChevy · 03-04-2012, 12:41 PM

Quote:

Originally Posted by dan42

Do all the gauges work? And are they repos or OEM?
Posted via Mobile Device

Yes they are all OEM and work as stated in original ad... Thanks

dan42 · 03-04-2012, 12:50 PM

I'm sorry, now I see your original post - I forgot to ask, do you have the wiring for the tach?
Posted via Mobile Device

HeavyMetalChevy · 03-04-2012, 12:58 PM

Quote:

Originally Posted by dan42

I'm sorry, now I see your original post - I forgot to ask, do you have the wiring for the tach?
Posted via Mobile Device

No I do not but I just ordered two new harnesses from another board member. I also have a complete original tach harness though I would include for $20.

dan42 · 03-04-2012, 01:59 PM

If you throw in the tach wiring I will take it for 190 shipped -
Posted via Mobile Device

HeavyMetalChevy · 03-04-2012, 02:24 PM

Quote:

Originally Posted by dan42

If you throw in the tach wiring I will take it for 190 shipped -
Posted via Mobile Device

Original price was $200. Now you want tme to throw in a harness and ship it for cheaper??? I like your style but $220 shipped. That is basically me throwing in a harness because it will be around $20 bucks to ship it to CALI.

dan42 · 03-04-2012, 02:51 PM

Understood. Let me think on it.
Posted via Mobile Device

77chris03 · 03-04-2012, 03:02 PM

battle of the dollar....gotta love it...i shipped some stuff the other day and unless you use flat rate shipping, its out of the water on cheap shipping...for some that dont understand that gas is expensive and that we all dont drive a eco friendly vehicle, when someone lowballs on "shipped" prices, your still getting a hell of a deal, especially if the nearest fedex,post office, etc is 10-15 miles away...lol

not to high jack your thread, i have a set of non tach tins and a complete non tach cluster with a few extra gauges if ur interested heavymetal....

HeavyMetalChevy · 03-04-2012, 03:09 PM

Quote:

Originally Posted by 77chris03

battle of the dollar....gotta love it...i shipped some stuff the other day and unless you use flat rate shipping, its out of the water on cheap shipping...for some that dont understand that gas is expensive and that we all dont drive a eco friendly vehicle, when someone lowballs on "shipped" prices, your still getting a hell of a deal, especially if the nearest fedex,post office, etc is 10-15 miles away...lol

not to high jack your thread, i have a set of non tach tins and a complete non tach cluster with a few extra gauges if ur interested heavymetal....

You are fine on the thread comments. I just posted a general discussion thread on that subject, (check it out) Seems I offended some people. I have no problems with people posting on my threads as long as they are not bashing my parts or hurting my sales. That's the way it should be. We are all here to help....Right??? I appreciate the offer on the tins but I have about 10 reg. cluster setups at the moment....

Thanks Chris

HeavyMetalChevy · 03-05-2012, 12:36 AM

ttt

HeavyMetalChevy · 03-08-2012, 12:55 AM

ttt

03-03-2012, 01:48 AM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	AWESOME!! Restored Tach Tin setup This has been blasted and repainted ALL gauge mounting tins and outer tach tin. Repainted needles, repainted whites on bottom gauge mount tins. Took off each gauge face and cleaned an polished. Reset speedometer to 000000. Just look at the pics folks. $200 ALL GAUGES WORK AND WERE TESTED Will now include new AAW tach harness all for $225 shipped. All you will need is lens, front tin, and bezel and you will have you a VERY!!!! nice all original gauge setup for around $375 dollars total!!!! please ask questions Oh yeah might add these are all originals Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 04-09-2012 at 09:38 PM.

03-03-2012, 01:51 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup more. The oil gauge can be swapped if the light rust scale on bottom is bothersome. It will never be seen though Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 03-03-2012 at 01:57 AM.

03-03-2012, 01:53 AM	#3
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: AWESOME!! Restored Tach Tin setup Hold onto this and after April I will buy it. Man this looks nice wish I wasn't saving for Disneyland. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-03-2012, 01:54 AM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup This lovely speedometer!!!!!!!!!! Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-03-2012, 02:02 AM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup I see you viewing... I knows ya' want it... reasonable offer always welcome __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-03-2012, 05:32 AM	#7
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-03-2012, 09:20 AM	#8
Cruisin' Oklahoma Registered User Join Date: May 2010 Location: Skiatook, Oklahoma Posts: 27	Re: AWESOME!! Restored Tach Tin setup Good deal but I have a non tach bezel... Posted via Mobile Device __________________ 69' Stepside, 350SB/TH350, Holley 600 4 Barrel, Headers, Edelbrock Intake, Valve Covers, and Breather, 275/60 R15's, Disc Brake conversion. "For we know that God works all things for the good of those that love Him, to those that are called according to His purpose." --Romans 8:28

03-03-2012, 09:56 PM	#9
skrenly Registered User Join Date: Feb 2008 Location: Coronado, CA Posts: 1,085	Re: AWESOME!! Restored Tach Tin setup I will go 150 shipped. Thanks for your consideration. Steve

03-04-2012, 12:05 AM	#10
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: AWESOME!! Restored Tach Tin setup Will that tach work with HEI? __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-04-2012, 11:20 AM	#14
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-04-2012, 12:39 PM	#15
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: AWESOME!! Restored Tach Tin setup Do all the gauges work? And are they repos or OEM? Posted via Mobile Device __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-04-2012, 12:50 PM	#17
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: AWESOME!! Restored Tach Tin setup I'm sorry, now I see your original post - I forgot to ask, do you have the wiring for the tach? Posted via Mobile Device __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-04-2012, 01:59 PM	#19
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: AWESOME!! Restored Tach Tin setup If you throw in the tach wiring I will take it for 190 shipped - Posted via Mobile Device __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-04-2012, 02:51 PM	#21
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: AWESOME!! Restored Tach Tin setup Understood. Let me think on it. Posted via Mobile Device __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-04-2012, 03:02 PM	#22
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: AWESOME!! Restored Tach Tin setup battle of the dollar....gotta love it...i shipped some stuff the other day and unless you use flat rate shipping, its out of the water on cheap shipping...for some that dont understand that gas is expensive and that we all dont drive a eco friendly vehicle, when someone lowballs on "shipped" prices, your still getting a hell of a deal, especially if the nearest fedex,post office, etc is 10-15 miles away...lol not to high jack your thread, i have a set of non tach tins and a complete non tach cluster with a few extra gauges if ur interested heavymetal.... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310



Register or Log In To remove these advertisements.

03-05-2012, 12:36 AM	#24
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-08-2012, 12:55 AM	#25
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: AWESOME!! Restored Tach Tin setup ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

Register or Log In To remove these advertisements.