Heater hose routing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KEH · 06-06-2003, 05:50 PM

Would someone please tell me the best way to hookup my hoses for a 350 motor. On the previous motor I think the supply line came from the intake beside the thermostat, and the return to the top of the radiator.

I've seen some though that come off the water pump. And also some which have a crossover, which I'm not sure if I need, or where it should go either (the hole on the vertical face of the manifold is only 5/8").

Thanks,
Confused

06-06-2003, 05:50 PM	#1
KEH Better late than never Join Date: Dec 2001 Location: Columbus, IN Posts: 324	Heater hose routing Would someone please tell me the best way to hookup my hoses for a 350 motor. On the previous motor I think the supply line came from the intake beside the thermostat, and the return to the top of the radiator. I've seen some though that come off the water pump. And also some which have a crossover, which I'm not sure if I need, or where it should go either (the hole on the vertical face of the manifold is only 5/8"). Thanks, Confused __________________ 1970 C/10 SWB Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.