GA 60-66 Parts - New fender emblems, radio&heater delete plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**partzpal** · 03-02-2014, 10:45 AM

$60 for everything including shipping shipped to lower 48 states.

Few parts that I pulled during my cleaning that I no longer need:

1. Pair of new/never installed fender emblems for 66.
2. I think this is a radio delete plate but not 100% sure but it was pulled from 62 GMC as I remember. Plate has light coat of prime and minimal surface rust where primer didn't cover.
3. Upper heater delete cover removed from 63 - cover was blasted & primed 15 years ago, has approximately 5 pin holes as shown in pics .

415 606 2564 or partzpal@gmail.com

**partzpal** · 03-02-2014, 08:07 PM

Sold as parts lot to include all parts shown in ad. Thanks

Casaba · 03-02-2014, 08:13 PM

If you decide to sell just the emblems I'd be interested. Also,let me know if you have any trade interests/needs

Thanks

**partzpal** · 03-02-2014, 09:33 PM

Thanks Casba for the offer but I'd prefer to keep all together but will make you a deal and take $50 for everything. I've got to get rid of some of this stuff to get mama happy again.

Casaba · 03-02-2014, 09:50 PM

No thanks, I have those same plates that I need to sell too!

Are the emblems repop or NOS? Might still be interested if NOS

4dranch · 03-08-2015, 11:04 AM

PM Sent

**VictoriaHardware** · 03-08-2015, 11:43 AM

I'll take it all

pimpston65 · 03-08-2015, 12:30 PM

Quote:

Originally Posted by VictoriaHardware

I'll take it all

those are NOS emblems, check the part number!!! had i saw em they'd be mine. i saw a pair of 65' come up once it was my only time every watching an NOS pair come up for auction, VERY good buy sir i tip my hat to you!!!

**VictoriaHardware** · 03-09-2015, 06:33 PM

Those are not NOS, the back is wrong. Here is an original. For die casting you need to keep a consistent thickness whenever possible to reduce "sinking". You see that clearly here with the de-bossed "01" showing. The repro took a shortcut to cheapen the tooling.

pimpston65 · 03-09-2015, 06:52 PM

right on, i thought they were cuz my repops have nothing on the back lesson learned...i think i was stuck on the numbers and not the whole picture!!!

03-02-2014, 10:45 AM	#1
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	60-66 Parts - New fender emblems, radio&heater delete plates $60 for everything including shipping shipped to lower 48 states. Few parts that I pulled during my cleaning that I no longer need: 1. Pair of new/never installed fender emblems for 66. 2. I think this is a radio delete plate but not 100% sure but it was pulled from 62 GMC as I remember. Plate has light coat of prime and minimal surface rust where primer didn't cover. 3. Upper heater delete cover removed from 63 - cover was blasted & primed 15 years ago, has approximately 5 pin holes as shown in pics . 415 606 2564 or partzpal@gmail.com Attached Images Last edited by partzpal; 03-02-2014 at 08:05 PM.

03-02-2014, 08:07 PM	#2
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	Re: 60-66 Parts - New fender emblems, radio&heater delete plates Sold as parts lot to include all parts shown in ad. Thanks

03-02-2014, 08:13 PM	#3
Casaba Registered User Join Date: Feb 2014 Location: Acworth GA Posts: 200	Re: 60-66 Parts - New fender emblems, radio&heater delete plates If you decide to sell just the emblems I'd be interested. Also,let me know if you have any trade interests/needs Thanks

03-02-2014, 09:33 PM	#4
partzpal Junior Member Join Date: Oct 2012 Location: Pulaski, TN Posts: 94	Re: 60-66 Parts - New fender emblems, radio&heater delete plates Thanks Casba for the offer but I'd prefer to keep all together but will make you a deal and take $50 for everything. I've got to get rid of some of this stuff to get mama happy again.

03-02-2014, 09:50 PM	#5
Casaba Registered User Join Date: Feb 2014 Location: Acworth GA Posts: 200	Re: 60-66 Parts - New fender emblems, radio&heater delete plates No thanks, I have those same plates that I need to sell too! Are the emblems repop or NOS? Might still be interested if NOS

03-08-2015, 11:04 AM	#6
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 60-66 Parts - New fender emblems, radio&heater delete plates PM Sent __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

03-08-2015, 11:43 AM	#7
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 803	Re: 60-66 Parts - New fender emblems, radio&heater delete plates I'll take it all

03-09-2015, 06:33 PM	#9
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 803	Re: 60-66 Parts - New fender emblems, radio&heater delete plates Those are not NOS, the back is wrong. Here is an original. For die casting you need to keep a consistent thickness whenever possible to reduce "sinking". You see that clearly here with the de-bossed "01" showing. The repro took a shortcut to cheapen the tooling. Attached Images

03-09-2015, 06:52 PM	#10
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,199	Re: 60-66 Parts - New fender emblems, radio&heater delete plates right on, i thought they were cuz my repops have nothing on the back lesson learned...i think i was stuck on the numbers and not the whole picture!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.