![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2015
Location: portage wi
Posts: 509
|
1940 windshield gasket
I know we have batted this topic around a few times but for some reason I can not find the answer to it. On Friday afternoon it decided to rain fairly hard while I was at work, needless to say I had my truck here and when I got in I had major amounts of water collected in the bottom trough of my new dash. I turned the corner and the water came rolling out on my floor. So my question to you guys is --- who makes a good fitting windshield gasket for 39-46 trucks? the one I have in there now I cant remember where it came from but it really never fit very well and has always leaked. I also think the center of the windshield doesn't fit as tight to the body as it should, I don't think I will be able to do much about that other than replacement of the frame. I think after being together for 20 years the bars that slide into the frame are probably not going to come back out to bend them a little straighter. I have been thinking about installing a chrome frame anyways, but I still want to find a good gasket before I do anything.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2010
Location: washington NJ
Posts: 769
|
Re: 1940 windshield gasket
Not sue if you seen some of my posts about Steele products. I didn't like the fit of my 46 gasket at all. Seemed way to small for the channel. Now it sits in the corner of the garage collecting dust.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2015
Location: portage wi
Posts: 509
|
Re: 1940 windshield gasket
So did you find a gasket that actually fits and works as intended?
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() ![]() Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,808
|
Re: 1940 windshield gasket
I need to do a drench test on the 42 and 46 to see if I did any better. The 42 has an oem frame and the 46 an aftermarket. The aluminum aftermarket center fit the 42 better than the 46 --will have to massge the 46. 42 gasket came from chevs of 40's. The 46 from Carters. I had an experienced window shop cut glass install windows and gasket to frames.
__________________
1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T Last edited by dennislbrooks; 07-25-2017 at 09:27 AM. Reason: words |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Dec 2010
Location: washington NJ
Posts: 769
|
Re: 1940 windshield gasket
Quote:
![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|