1960 Clutch Slave Cylinder Bracket? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60short** · 09-03-2017, 12:00 PM

Good Morning All,

I have a 1960 Apache with a rebuilt 350, and what I was told was the stock 3 speed converted to shift on the floor - however I had the slave cylinder mounting bracket break on me and I was hoping somebody could tell me if this is a stock part? or something that was done as part of the floor shift conversion? It feels like Aluminium, so I am guessing its not original, but I am not sure where it came from either

IMG_4451 by Keith, on Flickr

IMG_4457 by Keith, on Flickr

Thanks,
Keith

LVPhotos · 09-03-2017, 06:45 PM

My 62 slave, passenger side.

**Captainfab** · 09-03-2017, 11:27 PM

What you have there is not original to a '60-'62 truck. The original configuration is as shown in LVPhotos' post. The slave bolts directly to the bellhousing.

**60short** · 09-04-2017, 12:01 AM

Ok, thanks for confirming guys ...

I don't have the parts to put this back to a column shift (though I would like to, so I will have to see if I can get it put back together...)

61K10 · 09-04-2017, 12:50 PM

find the correct bell-housing and parts for your 3 on the tree. do you have a pic of the parts bolted to the trans or bell? looks like some bolts and washers can get you back on the road temp.

LVPhotos · 09-04-2017, 05:15 PM

For the record and idea, I switched over to Hydraulic bearing because the clutch fork and clear the headers

**Captainfab** · 09-04-2017, 11:14 PM

A 3 on the tree versus a floor shift has absolutely no bearing on the slave cylinder mounting. A pic of the bellhousing you have may help determine what you are working with.

Quote:

Originally Posted by 60short

Ok, thanks for confirming guys ...

I don't have the parts to put this back to a column shift (though I would like to, so I will have to see if I can get it put back together...)

**60short** · 09-05-2017, 11:34 PM

I will try and snag a picture from underneath the truck tomorrow - its currently dead at work ... the slave cylinder was spaced out (using this bracket) to set the "throw" correctly.

I have no idea if it was correctly done or not, but it was functioning (at least for a while)

I dropped this bracket at the fab shop to see if they can re-create (a little more robustly), and I will get it running and then we can see about making it correct as well.

Thank you guys all for your help!

Mister319 · 03-24-2019, 03:29 PM

I just yanked the 235 out of my 60 and it had a bracket like the one being talked about,and I broke it but the v8 bellhousing that I bought looks like the slave bolts directly to it, like in LV's pic

09-03-2017, 12:00 PM	#1
60short Revitalizing a 6T C10 Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 224	1960 Clutch Slave Cylinder Bracket? Good Morning All, I have a 1960 Apache with a rebuilt 350, and what I was told was the stock 3 speed converted to shift on the floor - however I had the slave cylinder mounting bracket break on me and I was hoping somebody could tell me if this is a stock part? or something that was done as part of the floor shift conversion? It feels like Aluminium, so I am guessing its not original, but I am not sure where it came from either IMG_4451 by Keith, on Flickr IMG_4457 by Keith, on Flickr Thanks, Keith

09-03-2017, 06:45 PM	#2
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 1960 Clutch Slave Cylinder Bracket? My 62 slave, passenger side. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

09-03-2017, 11:27 PM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: 1960 Clutch Slave Cylinder Bracket? What you have there is not original to a '60-'62 truck. The original configuration is as shown in LVPhotos' post. The slave bolts directly to the bellhousing. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-04-2017, 12:01 AM	#4
60short Revitalizing a 6T C10 Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 224	Re: 1960 Clutch Slave Cylinder Bracket? Ok, thanks for confirming guys ... I don't have the parts to put this back to a column shift (though I would like to, so I will have to see if I can get it put back together...)

09-04-2017, 12:50 PM	#5
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 1960 Clutch Slave Cylinder Bracket? find the correct bell-housing and parts for your 3 on the tree. do you have a pic of the parts bolted to the trans or bell? looks like some bolts and washers can get you back on the road temp. __________________ 1961 chevy K10 my build is------------61K10 build

09-04-2017, 05:15 PM	#6
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 1960 Clutch Slave Cylinder Bracket? For the record and idea, I switched over to Hydraulic bearing because the clutch fork and clear the headers Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

09-05-2017, 11:34 PM	#8
60short Revitalizing a 6T C10 Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 224	Re: 1960 Clutch Slave Cylinder Bracket? I will try and snag a picture from underneath the truck tomorrow - its currently dead at work ... the slave cylinder was spaced out (using this bracket) to set the "throw" correctly. I have no idea if it was correctly done or not, but it was functioning (at least for a while) I dropped this bracket at the fab shop to see if they can re-create (a little more robustly), and I will get it running and then we can see about making it correct as well. Thank you guys all for your help!

03-24-2019, 03:29 PM	#9
Mister319 Registered User Join Date: Apr 2018 Location: Azusa California Posts: 13	Re: 1960 Clutch Slave Cylinder Bracket? I just yanked the 235 out of my 60 and it had a bracket like the one being talked about,and I broke it but the v8 bellhousing that I bought looks like the slave bolts directly to it, like in LV's pic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.