Setting Bed Question? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dodge68charger · 03-12-2021, 12:41 AM

I Heard I Need To Add Some Spacers In Between The Bed Sills Before I Set It Down On The Frame On My 69 C10.

Where Do The Spacers Go and Do I Need To Add Them?
Posted via Mobile Device

BigBird05 · 03-12-2021, 08:54 AM

When I took the bed off of my 72 there were no spacers. Metal on metal.

Dodge68charger · 03-12-2021, 10:14 AM

Thank You.

Was Referring To The Bed Wood When Bolting The Sills In Place
Posted via Mobile Device

**kwmech** · 03-12-2021, 10:35 AM

Same

**Accelo** · 03-12-2021, 11:02 AM

Is the reason for the spacers misalignment with the cab?
If this is the issue its the cab mounting that needs attention not the bed.

If I am way off base maybe post some pictures of the issue?

OregonNed · 03-12-2021, 04:22 PM

When I put my bed back together after replacing the wood, and cleaning and painting the sills, I cut squares of tool box liner to sandwich in. Probably not needed, but I did it..

**Boog** · 03-12-2021, 08:52 PM

There are some square 1/4" thick rubber pads that go in between the frame rails and the cross sills available from Classic Parts and maybe LMC, GMC Pauls, etc.

03-12-2021, 12:41 AM	#1
Dodge68charger Registered User Join Date: Jul 2014 Location: Washington Posts: 547	Setting Bed Question? I Heard I Need To Add Some Spacers In Between The Bed Sills Before I Set It Down On The Frame On My 69 C10. Where Do The Spacers Go and Do I Need To Add Them? Posted via Mobile Device

03-12-2021, 08:54 AM	#2
BigBird05 Registered User Join Date: Aug 2019 Location: Cheraw Posts: 1,300	Re: Setting Bed Question? When I took the bed off of my 72 there were no spacers. Metal on metal.

03-12-2021, 10:14 AM	#3
Dodge68charger Registered User Join Date: Jul 2014 Location: Washington Posts: 547	Re: Setting Bed Question? Thank You. Was Referring To The Bed Wood When Bolting The Sills In Place Posted via Mobile Device

03-12-2021, 10:35 AM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,730	Re: Setting Bed Question? Same

03-12-2021, 11:02 AM	#5
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,360	Re: Setting Bed Question? Is the reason for the spacers misalignment with the cab? If this is the issue its the cab mounting that needs attention not the bed. If I am way off base maybe post some pictures of the issue?

03-12-2021, 04:22 PM	#6
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Setting Bed Question? When I put my bed back together after replacing the wood, and cleaning and painting the sills, I cut squares of tool box liner to sandwich in. Probably not needed, but I did it.. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-12-2021, 08:52 PM	#7
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,698	Re: Setting Bed Question? There are some square 1/4" thick rubber pads that go in between the frame rails and the cross sills available from Classic Parts and maybe LMC, GMC Pauls, etc. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.