Exhaust headers for 292 ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Asshat · 04-10-2022, 09:14 PM

Thinking about these, since I am fed up with the stock manifold - such a piece of crap.

Hoping these from Speedway Motors will work, just not sure if anyone here has had fit issues:
https://www.speedwaymotors.com/Flowt...ze,141098.html

**slepysal** · 04-12-2022, 01:05 AM

i just installed some Tom Langdon cast shorties on my 250, I got rid of some long tube headers, The long tube hung to low .

the Langdon's don't.
[ATTACH]2184858[/ATTACH

**slepysal** · 04-12-2022, 01:08 AM

This is the clearance now disregard picture above that was before the shop welded the new pipes in
Name: IMG_1873.jpg
Views: 323
Size: 48.1 KB

Asshat · 04-12-2022, 01:37 AM

Quote:

Originally Posted by slepysal

This is the clearance now disregard picture above that was before the shop welded the new pipes in
Attachment 2184861

Anymore pics?

No issues with the clutch linkage?

The Langdons look nice, are they much better?

**slepysal** · 04-12-2022, 01:57 AM

Quote:

Originally Posted by Asshat

Anymore pics?

No issues with the clutch linkage?

The Langdons look nice, are they much better?

I am running a hydraulic clutch set up (1960) So no issues . Let me dig up the instructions ,I believe there is a slight mod if you are running a stock clutch linkage. I liked the long tubes but the lack of ground clearance made some driveways and roads a no go, and my truck isn't that low
Name: 2 alviso.jpg
Views: 336
Size: 44.8 KB

Name: 2 alviso.jpg
Views: 336
Size: 44.8 KB

Asshat · 04-12-2022, 11:20 AM

Quote:

Originally Posted by slepysal

I am running a hydraulic clutch set up (1960) So no issues . Let me dig up the instructions ,I believe there is a slight mod if you are running a stock clutch linkage. I liked the long tubes but the lack of ground clearance made some driveways and roads a no go, and my truck isn't that low
Attachment 2184867

Mine is stock height, seems like it would not be an issue for me. Just worried about that linkage clearance.

04-10-2022, 09:14 PM	#1
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Exhaust headers for 292 ? Thinking about these, since I am fed up with the stock manifold - such a piece of crap. Hoping these from Speedway Motors will work, just not sure if anyone here has had fit issues: https://www.speedwaymotors.com/Flowt...ze,141098.html __________________ 1963 C20, small window, long bed 292, 4-speed

04-12-2022, 01:05 AM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Exhaust headers for 292 ? i just installed some Tom Langdon cast shorties on my 250, I got rid of some long tube headers, The long tube hung to low .the Langdon's don't. [ATTACH]2184858[/ATTACH Attached Images __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 04-12-2022 at 01:10 AM.

04-12-2022, 01:08 AM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Exhaust headers for 292 ? This is the clearance now disregard picture above that was before the shop welded the new pipes in __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.