CO 71 cab and uncut a/c dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*454stepside* · 08-28-2011, 12:39 AM

uncut radio hole low hump non a/c needs rockers and inners and cab corners floors are pretty nice no rust on roof or windsheild local pickup only or might be able to put it on a trailer and deliver for gas and time but not to far 400.00 sold

uncut a/c dash removed from 69 chevy truck only good part on the cab no pics but can get some if needed shipping might cost a bit cause its so long but will ship if needed 180.00 shipped back up for sale

Vintage Windmills · 08-28-2011, 04:53 PM

How are the mounts/supports, kickpanels and how far east would you be willing to haul?

Critterman71 · 08-28-2011, 05:19 PM

I would like to see the uncut A/C dash send pics to cbcritterman@aol.com. Thanks Critterman71

*454stepside* · 08-28-2011, 06:13 PM

vintage i have pics give me a sec ill load them

critter ill take the mile drive to my dads in a few and get some pics for you

*454stepside* · 08-28-2011, 06:25 PM

how far would you be thinking you would want me to go i am thinking something i could make there and back in a day lol

*454stepside* · 08-28-2011, 06:29 PM

few more

*454stepside* · 08-28-2011, 07:12 PM

pics for critter

Critterman71 · 08-28-2011, 07:21 PM

Thanks for the pics did the whole thing just unbolt? I have not pulled mine out yet as I was wondering how to get it out. thought I might have to plasma cut it and weld new on back in. Check on shipping on it to 48872 thanks Critteman71

*454stepside* · 08-28-2011, 07:31 PM

it un bolts from the sides but you have to pull the windsheild out and drill the spot welds from the bottom of the windsheild lip not that hard to do and will check in the morning on shipping for you

Critterman71 · 08-28-2011, 07:35 PM

Thanks For the info on the dash removal sounds like a winter project but thats right around the corner for me here in Michigan.

*454stepside* · 08-28-2011, 07:41 PM

its getting there here in colorado to lol and no problem on info

*454stepside* · 08-28-2011, 07:49 PM

shipping might kill it according to grey hound your looking at about 90.00 to ship

Vintage Windmills · 08-28-2011, 09:12 PM

Thanks for the pics. So are there points on the mounts/supports or anywhere else besides rockers and corners that aren't solid?

*454stepside* · 08-28-2011, 09:22 PM

all i could see was inner rockers outer rockers and cab corners every where else looked good

Critterman71 · 08-28-2011, 09:37 PM

Well if it is 90 ish I am still in but is there any other company Fedex UPS close enough as they will ship it as well I received a bumper in a box dont remember the weight but it came fedex and was less than fifty from Texas. But you may not have access to those companies depending on your location just thought I would toss it out there. Also the box does not matter much on something like that if it was wrapped in a good amount of news paper and a cardboard box cut down and wrapped around that would do well I have shipped a lot of items that are odd like the dash and had good luck so far. Let me know what grey hound says. Thanks Chris

*454stepside* · 08-28-2011, 09:48 PM

fed ex says 60 thats a lot better
and if it turns out to be less ill refund the extra to you

*454stepside* · 08-29-2011, 10:16 PM

ttt

LCWARRIOR · 08-30-2011, 02:25 PM

Ill take the a/c dash!

*454stepside* · 09-02-2011, 11:54 AM

ttt

*454stepside* · 09-17-2011, 01:47 AM

ttt for the cab

*454stepside* · 09-22-2011, 02:42 AM

bump

*454stepside* · 09-26-2011, 11:56 AM

ttt

*454stepside* · 10-08-2011, 02:36 AM

cab still up for grabs

*454stepside* · 10-09-2011, 01:46 AM

ttt dash back up for sale and i found the a/c balls with it

*454stepside* · 10-12-2011, 11:28 PM

bumped

08-28-2011, 12:39 AM	#1
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	71 cab and uncut a/c dash uncut radio hole low hump non a/c needs rockers and inners and cab corners floors are pretty nice no rust on roof or windsheild local pickup only or might be able to put it on a trailer and deliver for gas and time but not to far 400.00 sold uncut a/c dash removed from 69 chevy truck only good part on the cab no pics but can get some if needed shipping might cost a bit cause its so long but will ship if needed 180.00 shipped back up for sale Attached Images Last edited by 454stepside; 12-01-2011 at 12:12 AM.

08-28-2011, 04:53 PM	#2
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 71 cab and uncut a/c dash How are the mounts/supports, kickpanels and how far east would you be willing to haul? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-28-2011, 05:19 PM	#3
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: 71 cab and uncut a/c dash I would like to see the uncut A/C dash send pics to cbcritterman@aol.com. Thanks Critterman71

08-28-2011, 06:13 PM	#4
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash vintage i have pics give me a sec ill load them critter ill take the mile drive to my dads in a few and get some pics for you

08-28-2011, 06:25 PM	#5
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash how far would you be thinking you would want me to go i am thinking something i could make there and back in a day lol Attached Images

08-28-2011, 06:29 PM	#6
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash few more Attached Images

08-28-2011, 07:12 PM	#7
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash pics for critter Attached Images

08-28-2011, 07:21 PM	#8
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: 71 cab and uncut a/c dash Thanks for the pics did the whole thing just unbolt? I have not pulled mine out yet as I was wondering how to get it out. thought I might have to plasma cut it and weld new on back in. Check on shipping on it to 48872 thanks Critteman71

08-28-2011, 07:31 PM	#9
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash it un bolts from the sides but you have to pull the windsheild out and drill the spot welds from the bottom of the windsheild lip not that hard to do and will check in the morning on shipping for you

08-28-2011, 07:35 PM	#10
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: 71 cab and uncut a/c dash Thanks For the info on the dash removal sounds like a winter project but thats right around the corner for me here in Michigan.

08-28-2011, 07:41 PM	#11
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash its getting there here in colorado to lol and no problem on info

08-28-2011, 07:49 PM	#12
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash shipping might kill it according to grey hound your looking at about 90.00 to ship

08-28-2011, 09:12 PM	#13
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 71 cab and uncut a/c dash Thanks for the pics. So are there points on the mounts/supports or anywhere else besides rockers and corners that aren't solid? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-28-2011, 09:22 PM	#14
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash all i could see was inner rockers outer rockers and cab corners every where else looked good

08-28-2011, 09:37 PM	#15
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: 71 cab and uncut a/c dash Well if it is 90 ish I am still in but is there any other company Fedex UPS close enough as they will ship it as well I received a bumper in a box dont remember the weight but it came fedex and was less than fifty from Texas. But you may not have access to those companies depending on your location just thought I would toss it out there. Also the box does not matter much on something like that if it was wrapped in a good amount of news paper and a cardboard box cut down and wrapped around that would do well I have shipped a lot of items that are odd like the dash and had good luck so far. Let me know what grey hound says. Thanks Chris



Register or Log In To remove these advertisements.

08-28-2011, 09:48 PM	#16
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash fed ex says 60 thats a lot better and if it turns out to be less ill refund the extra to you

08-29-2011, 10:16 PM	#17
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash ttt

08-30-2011, 02:25 PM	#18
LCWARRIOR Registered User Join Date: Jul 2011 Location: Las Cruces New Mexico Posts: 22	Re: 71 cab and uncut a/c dash Ill take the a/c dash! __________________ 1962 IMPALA SS RAGTOP 1962 IMPALA HARDTOP 1952 CHEVY TRUCK 1971 CHEVY K5 BLAZER 1969 CHEVY C-10 TRUCK 1992 CHEVY 4X4 BLAZER (2 DOOR)

09-02-2011, 11:54 AM	#19
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash ttt

09-17-2011, 01:47 AM	#20
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash ttt for the cab

09-22-2011, 02:42 AM	#21
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash bump

09-26-2011, 11:56 AM	#22
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash ttt

10-08-2011, 02:36 AM	#23
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash cab still up for grabs

10-09-2011, 01:46 AM	#24
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash ttt dash back up for sale and i found the a/c balls with it

10-12-2011, 11:28 PM	#25
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: 71 cab and uncut a/c dash bumped

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode