Blazer rear ashtray needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 05-22-2003, 10:39 PM

I need the drivers side ash tray assembly for the back seat of my 77 Blazer. I am not sure if left and right assemblies are the same (since i am missing one) and i am also not sure what yrs will fit. The assembly actually sits in the arm rest pad if that helps.

Thanks - Jeff

alf4444 · 05-23-2003, 09:13 AM

If you are talking about the ones that go in the side panels I have A set out of my 78, I'm not going to be using my side panels so I don't need it, its not very clean though.

bigblock73 · 05-23-2003, 09:18 AM

No, I need the one that actually sits in the armrest of the rear seat.

Thanks though!

...Jeff

bigblock73 · 05-27-2003, 08:57 PM

bumpity bump

anyone?

**crossy** · 05-28-2003, 12:34 AM

what did you do put a bronco seat in it ??

even the 86 Silverado K5 I have does not have ashtrays in the arm rests.

bigblock73 · 05-28-2003, 06:56 AM

Hll no Dave! The older Blazers had them in the arm rest...hopefully i can post a pic later today.

...Jeff

bigblock73 · 05-28-2003, 11:10 AM

you can barely see where the ashtray goes on the drivers side of the rear seat...and NO this is not a ford seat!

-Jeff

**crossy** · 05-28-2003, 01:19 PM

Oh, OK it's a Plymouth Trailduster seat .

only kidding

junkyardpartseeker · 05-29-2003, 05:49 PM

That seat looks similar to the 3rd seat I have in my 84 suburban. I know the ashtray you are looking for. I am going to the junkyard tomorrow for body parts and will look around for you one. What is the price range you are willing to spend for one minus shipping. So I will know a price range to stay in. Tommy Little Rock,AR

bigblock73 · 05-29-2003, 07:23 PM

Thanks Tommy, I really don't want to spend more than $5 or so plus shipping...if anyone tries to sell it for more than $5 they should be shot!

Thanks!

-Jeff

junkyardpartseeker · 05-30-2003, 12:54 AM

Jeff,
I will make sure I keep the price under the $5 limit. I know that shipping via priority is $3.85 not sure what parcel post is. If I find one on friday or saturday, I will email you and let you know. Don't get your hopes up, just keep your fingers crossed. I have a few junkyards here with suburban and blazers in them.
Tommy Davis
Little Rock,AR
especiallyforyou@sbcglobal.net

bigblock73 · 06-03-2003, 12:44 AM

Tommy, did you have any luck with finding an ashtray?

Anyone else??

...Jeff

apstguy · 06-03-2003, 01:34 AM

I thought I saw one last time I was at the junk yard. Want me to go look? Everytime I say I see something, I go back & everything is striped

Let me know by PM

junkyardpartseeker · 06-03-2003, 02:10 AM

Haven't found one yet. Still have a few of the junkyards to check out. If I can't find one here, I am sure someone can. I do believe the ashtray from the armrest of a 3rd seat in a suburban will fit. Like I said, your seat is shaped just like my 3rd seat. I will keep looking and let you know if I find it.
Tommy

junkyardpartseeker · 06-03-2003, 07:35 PM

Found you one

Email me directly and I will send you pics of it.
Tommy Davis

bigblock73 · 06-04-2003, 08:18 AM

Tommy, YGM!

05-22-2003, 10:39 PM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Blazer rear ashtray needed I need the drivers side ash tray assembly for the back seat of my 77 Blazer. I am not sure if left and right assemblies are the same (since i am missing one) and i am also not sure what yrs will fit. The assembly actually sits in the arm rest pad if that helps. Thanks - Jeff

05-23-2003, 09:13 AM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	If you are talking about the ones that go in the side panels I have A set out of my 78, I'm not going to be using my side panels so I don't need it, its not very clean though. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

05-28-2003, 12:34 AM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	what did you do put a bronco seat in it ?? even the 86 Silverado K5 I have does not have ashtrays in the arm rests. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

05-28-2003, 11:10 AM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	you can barely see where the ashtray goes on the drivers side of the rear seat...and NO this is not a ford seat! -Jeff Attached Images

05-28-2003, 01:19 PM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	Oh, OK it's a Plymouth Trailduster seat . only kidding __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

05-23-2003, 09:18 AM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	No, I need the one that actually sits in the armrest of the rear seat. Thanks though! ...Jeff

05-27-2003, 08:57 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	bumpity bump anyone?

05-28-2003, 06:56 AM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Hll no Dave! The older Blazers had them in the arm rest...hopefully i can post a pic later today. ...Jeff

05-29-2003, 05:49 PM	#9
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	ashtray That seat looks similar to the 3rd seat I have in my 84 suburban. I know the ashtray you are looking for. I am going to the junkyard tomorrow for body parts and will look around for you one. What is the price range you are willing to spend for one minus shipping. So I will know a price range to stay in. Tommy Little Rock,AR __________________ junkyardpartseeker@sbcglobal.net

05-29-2003, 07:23 PM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Thanks Tommy, I really don't want to spend more than $5 or so plus shipping...if anyone tries to sell it for more than $5 they should be shot! Thanks! -Jeff

05-30-2003, 12:54 AM	#11
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	ashtray Jeff, I will make sure I keep the price under the $5 limit. I know that shipping via priority is $3.85 not sure what parcel post is. If I find one on friday or saturday, I will email you and let you know. Don't get your hopes up, just keep your fingers crossed. I have a few junkyards here with suburban and blazers in them. Tommy Davis Little Rock,AR especiallyforyou@sbcglobal.net __________________ junkyardpartseeker@sbcglobal.net

06-03-2003, 12:44 AM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Tommy, did you have any luck with finding an ashtray? Anyone else?? ...Jeff

06-03-2003, 01:34 AM	#13
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	I thought I saw one last time I was at the junk yard. Want me to go look? Everytime I say I see something, I go back & everything is striped Let me know by PM __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

06-03-2003, 02:10 AM	#14
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	Bigblock73 Haven't found one yet. Still have a few of the junkyards to check out. If I can't find one here, I am sure someone can. I do believe the ashtray from the armrest of a 3rd seat in a suburban will fit. Like I said, your seat is shaped just like my 3rd seat. I will keep looking and let you know if I find it. Tommy __________________ junkyardpartseeker@sbcglobal.net

06-03-2003, 07:35 PM	#15
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	ashtray Found you one Email me directly and I will send you pics of it. Tommy Davis __________________ junkyardpartseeker@sbcglobal.net Last edited by junkyardpartseeker; 06-03-2003 at 07:42 PM.



Register or Log In To remove these advertisements.

06-04-2003, 08:18 AM	#16
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Tommy, YGM!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.