|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
07-21-2003, 11:40 PM
|
#1 |
|
Flamin' Bass
Join Date: Aug 2001
Location: Galloway, NJ, US
Posts: 315
|
HELP! - New MC leaking - from TOP?
I replaced the non-power brake master cylinder last year, but just got the truck on the road last month. After I drive it, I get a load of brake fluid all around the sides of the MC, dripping down on to the steering shaft (and wiping out my new paint @#$^%).
If the truck just sits, theres no leak. It's definitely coming out of the top; I can see it seeping from under the rubber gasket; it's not leaking where the brake lines screw in at all. I've cleaned and sanded the rim of the MC and the rubber gasket is new, clean and flexible. The bail is tight; need a screwdriver to pry it loose. I'm out of ideas here, short of using Form-a-Gasket, but I suspect there's something else wrong. BTW: I started out with the brake fluid level pretty near the top, but it's now about 3/4" down, and it still leaks.... TIA
__________________
Rick Olson /nosto/ Galloway, NJ Pics : http://community.webshots.com/user/nosto53 1972 Triumph TR6 - full resto, now with a Toyota 5-speed 1975 F**D F-100 - rusty, but reliable 1982 HD XLH-1000 1967 C-10, shortstep, 350/M21 4spd, nitrogen tank fills fast bags on 4 corners, Toyo 255/45X20s on American Eagle 221 20X8s, shaved locks and handles, antenna, fuel filler, tiny C-notch, rear fuel tank, long headers, Edelbrock, worn 600 Holley, Checkmate flush hard cover, rear pan, custom LED taillights - painted it, too! But don't like it so I'm gonna do it again!! |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode