![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Franks'62burb4x4conversion
Heres what she looked like at first . A '62 GMC 2x4 Burb.
with 305 V-6, and a Muncie 4 speed. the donor chassis a '74 3/4 ton 4x4, camper special i had for years |
![]() |
![]() |
![]() |
#2 |
Second Chance Program
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
|
Re: Franks'62burb4x4conversion
Going to stick with the v6?
__________________
90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
The '74 4x4 chassis (which is a GMC) had a SBC 400, but i swapped that out for a BBC 454
![]() For some reason I ALLWAYS end up getting GMC's, not chevys ,,,, My '73 prerunner Blazer... A GMC! just worked out that way. ![]() Anyway I shortened the frame 17" AND Zee cut it up, in the front or down in the rear to better match contour of older floor/body. Result; no big gap between cab and forward to core support! i reused some old frame channel to fill in top and bottom gaps. which completely isn't shown. the bottom of frame got filled in and I will "box" in the back. '62 now sits on 4x4 chassis nicely |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
what do you know? RUST! so get out the wheel of death and start cutting!
deeper and deeper i go. It ends up not much was left of rockers. replace both sides, up the A pillar a little way, and floor pieces. Now i see theres a complete front floor panel available... wish i had that when i started. i just kinda widdled what was gone and used floor "patch" panels |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
more to remove
then start adding |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
more coming along.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
so i decided..off road truck, needs off road safety, plus i had to attach the old body to the newer chassis anyway, why not full cage it? ..2" chromoly tubing.
i plan on using this truck to tow and/or use it on the trails, chase vehicle at races. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
thru floor to chassis
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
start throwing tubes at it , but i still have a bunch more rust repair to go.
the back floor that holds tailgate, and back of truck together... for the most part GONE! i couldn't find any replacement panels,, so ill Fabricate my own. so i start by bending up and forming new parts |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
bend up flanges, tack them in. make patterns
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
more parts, the "end caps" for C-pillar to floor, the floor stuff.
here i start on the top plates that hold the wood to the rear floor. made a dimpling die so the bolts will fit flush with floor. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
more stufff
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,513
|
Re: Franks'62burb4x4conversion
Looks like you're going to do it right.
![]()
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
since this frame was originally a side mount fuel tanks and spare tire under the bed,truck ... i cut out the cross member that went between rear spring shackles,built a crossmember that goes over the top and bottom of the fuel tank.. and built a 50 gallon aluminum tank
|
![]() |
![]() |
![]() |
#16 |
Second Chance Program
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
|
Re: Franks'62burb4x4conversion
Excellent fab work!!
__________________
90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work. |
![]() |
![]() |
![]() |
#17 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Franks'62burb4x4conversion
Very nice work
![]() I like your dimpling die for the bolt recesses at the rear sill. Did you make that?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#18 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Franks'62burb4x4conversion
Dude, you've got it going on. Very nice work.
![]()
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#19 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: Franks'62burb4x4conversion
I like it. Is there any suspension lift? and what size wheels and tires are those?
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
Well i made dimpling dies a few years back ,the typicle round hole flare (1st picture) BUT I found i can get a little creative with mismatching top and bottom die sizes to get a few different results... this style one of them (2nd pic)
|
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
Quote:
i've been a fan of your stuff! no suspension lift to speak of , and the front springs are shot! I'm going to replace them....so the front should come up a bit. wheels -stock and tires are 35" x 12.50" x 16.5" , simply rollers for now, i have some 17"aluminum wheels... but I like the look now, and we know 16.5" are out! soooo...maybe some 17 steelies? Last edited by Franks Fab Shop; 11-12-2012 at 01:21 AM. |
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Aug 2009
Location: costa mesa , Calif.
Posts: 120
|
Re: Franks'62burb4x4conversion
I got to some plumbing,.. rear brake line, and fuel line, with 1st inline filter.
i convert to jic style -an fittings anytime i can! |
![]() |
![]() |
![]() |
#23 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: Franks'62burb4x4conversion
thanks, I like the look of those 35's.. I have been wanting mags for mine, but am also on the fence... the road de-icer here is h-LL on aluminum , so I might be better off with a set of steel wheels
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
![]() |
![]() |
![]() |
#24 |
Just here to tinker
![]() Join Date: Jun 2008
Location: Holland, MI
Posts: 3,687
|
Re: Franks'62burb4x4conversion
Wow man. Incredible work! I'm totally jealous of your fab skills. That thing is going to be awesome!
Posted via Mobile Device
__________________
78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(winter unit)https://67-72chevytrucks.com/vboard/...25#post8900725 |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Franks'62burb4x4conversion
wonder what happened with this one?
ron |
![]() |
![]() |
![]() |
Bookmarks |
|
|