NP205 U-bolt question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Speeding Dakota · 10-06-2018, 07:51 PM

I lost the u-bolts that holds the front U-joint to the NP205 yoke. Any idea were I can find them? They seem to be 1 3/4" center to center
thanks

B. W. · 10-06-2018, 11:29 PM

Try Moog P/N 329-10. Any parts house should be able to cross that #.

Speeding Dakota · 10-10-2018, 10:50 PM

Quote:

Originally Posted by B. W.

Try Moog P/N 329-10. Any parts house should be able to cross that #.

Thanks - I went to NAPA and got the related MOOG 329-10, got home and found that they were to short to get the nut completely on. Any other suggestions?
based on the length of the 329-10 U-bolts (2" long) it seems I need something about 2-1/4" long

**jeffahart** · 10-11-2018, 12:55 AM

Hmmm, what kind of angle do you have up front? I think you should have a CV up front hooking to the 205. Then you would have four bolts going through the yoke holes and bolting into the CV flange.

j

10-06-2018, 07:51 PM	#1
Speeding Dakota Registered User Join Date: Oct 2013 Location: Shrewsbury, PA Posts: 325	NP205 U-bolt question I lost the u-bolts that holds the front U-joint to the NP205 yoke. Any idea were I can find them? They seem to be 1 3/4" center to center thanks

10-06-2018, 11:29 PM	#2
B. W. Registered User Join Date: Nov 2014 Location: Bigfork, Montana Posts: 1,137	Re: NP205 U-bolt question Try Moog P/N 329-10. Any parts house should be able to cross that #.

10-11-2018, 12:55 AM	#4
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,910	Re: NP205 U-bolt question Hmmm, what kind of angle do you have up front? I think you should have a CV up front hooking to the 205. Then you would have four bolts going through the yoke holes and bolting into the CV flange. j __________________ White K20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.