![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Flamin' Bass
Join Date: Aug 2001
Location: Galloway, NJ, US
Posts: 315
|
Whistles while you drive....can't stand it!
Now that the weather is getting a little cooler I'm driving with the windows up. What I notice the most is the whistling from the vent windows. It's driving me crazy!
I've replaced all the rubber gaskets, felt and seals, re-seated the glass and the vent lock/latches are tight. But I still get whistling. This summer I tried to find out where it was coming from by covering all the outside vent window rubber areas with masking tape and driving. It was quiet! Then I gradually removed the tape one piece at a time until I heard the whistle. Unfortunately, I still couldn't pinpoint where the whistle came from. Anyone have suggestions or tricks to take care of this annoyance? Please - Nobody tell me to go with one-piece glass - I LIKE the vents! Thanks,
__________________
Rick Olson /nosto/ Galloway, NJ Pics : http://community.webshots.com/user/nosto53 1972 Triumph TR6 - full resto, now with a Toyota 5-speed 1975 F**D F-100 - rusty, but reliable 1982 HD XLH-1000 1967 C-10, shortstep, 350/M21 4spd, nitrogen tank fills fast bags on 4 corners, Toyo 255/45X20s on American Eagle 221 20X8s, shaved locks and handles, antenna, fuel filler, tiny C-notch, rear fuel tank, long headers, Edelbrock, worn 600 Holley, Checkmate flush hard cover, rear pan, custom LED taillights - painted it, too! But don't like it so I'm gonna do it again!! |
![]() |
![]() |
![]() |
#2 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Somebody has to do it, it just as well be me.
![]() ![]()
__________________
Fred There is no such thing as too much cam...just not enough engine. ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2003
Location: Crescent City, FL
Posts: 492
|
Are the vent handles tight enough? Try washers/shims.
__________________
Bob 68 C20 Camper Special |
![]() |
![]() |
![]() |
#4 |
Resident Curmudgeon
![]() Join Date: Dec 1999
Location: NH
Posts: 6,662
|
I have to ask. Does it only whistle while moving? If not, it may be the voices in your head!
If only while moving, the US Gov. issues shims for this. Depending upon your needs, they range in cost from a penny to a quarter and can be found at any bank. ![]()
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter ![]() Maybe I need to sell some of this crap ![]() Yet another Bozo with a sawz-all |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
What tune does it whistle? Just kidding. Try this: Close everything tight. Turn heater blower on high. From the outside take some soapy water and dab around the vent window-leak should show up as a bubble. If this fails change channels-might be whistling a differant tune. (LOL-still just kidding)
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2004
Location: Saskatchewan, Canada
Posts: 1,371
|
Is it the opening feature or the look you like? If it's just the look, I'd use black RTV silicone on the rubber. Use a tiny bead and you'll never know it was there, except for the lack of noise. I like the look of the vents, but never open them. This is likely what I'll do.
__________________
1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jun 2002
Location: Augusta Missouri
Posts: 804
|
I feel your pain! I bought two new vent windows just so I could avoid this problem, now the drivers side whistles like crazy, it is making me crazy ! I like the soap idea I am going to try that , maybe then I can pinpoint the leak.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
Go to electric 1 window set up from:
http://www.a1electric.com/Merchant2/...ct_Code=GM49-K Maybe this is the answer???
__________________
Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 12-22-2004 at 12:37 PM. |
![]() |
![]() |
![]() |
#9 |
Flamin' Bass
Join Date: Aug 2001
Location: Galloway, NJ, US
Posts: 315
|
Thanks for the replys -
Yup, I had clear packing tape on for a while, except I DO like to open the vents, so I think I'll try jhow66's bubble maker idea. Besides, I have to leave one vent unlocked all the time because my door solenoid remote unit is acting flakey, sometimes it pops, sometimes it don't. Yes, I have a 911 cable, but have to lay on the ground to use it.
__________________
Rick Olson /nosto/ Galloway, NJ Pics : http://community.webshots.com/user/nosto53 1972 Triumph TR6 - full resto, now with a Toyota 5-speed 1975 F**D F-100 - rusty, but reliable 1982 HD XLH-1000 1967 C-10, shortstep, 350/M21 4spd, nitrogen tank fills fast bags on 4 corners, Toyo 255/45X20s on American Eagle 221 20X8s, shaved locks and handles, antenna, fuel filler, tiny C-notch, rear fuel tank, long headers, Edelbrock, worn 600 Holley, Checkmate flush hard cover, rear pan, custom LED taillights - painted it, too! But don't like it so I'm gonna do it again!! |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2004
Location: saskatoon, planet earth
Posts: 697
|
Just a thought.. In my obsession with all things heater/ ventilation realated I was thinking that our trucks, unlike slightly newer vehicles don't seem to have any exit vents for the cab. Newer vehicles all seem to have someplace for air to escape so the ventilation system can "flow through". mid '70's trucks had a black plastic vent inside the door jam. I'm thinkin if a person put some type of vent with a one-way flapper type valve in an inconspicuos place it would let the air out in a controlled way. This would stop the air from having to sneak out any place it could , as through vent seals etc. What do you think? It would also improve heater air flow volume. Also, your problem may not be eveident when the truck is parked because the cowel vent area is a natural high preasure area. As speed increases air is forced into the cowel and gives a bit of "boost" to your heating system. If you've ever driven a truck with a blown heater fan, you'll know becasue if you drive fast enough you can feel air come through the defroster/heater. ( Not recomended)
Last edited by purple gas; 12-22-2004 at 09:44 PM. |
![]() |
![]() |
![]() |
#11 |
hart
Join Date: Jul 2004
Location: hell nebraska
Posts: 115
|
Well totaly off subject When I bought new Tires for my blazer I got the most grip I could fine. the Idoit that was selling them to me told me I didnt want them because they had to much road noise. I told him I have shot glasspacks and A loud radio. so.. anyway Id recomend ether of them. but my truck on the other hand has a hole through the floor I could throw a cat through so I dont have to worry about a whistle. Its just falling through.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Oct 2004
Location: saskatoon, planet earth
Posts: 697
|
LMFAO. It's also a good way do jestison your beer, or whatever when the cops are pullin you over. (also not hightly recomended)
|
![]() |
![]() |
![]() |
#13 |
hart
Join Date: Jul 2004
Location: hell nebraska
Posts: 115
|
Thats why Im putting In one of those 6 pack consels, just dont know what to do with the other 18.
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Jun 2002
Location: Augusta Missouri
Posts: 804
|
Speaking of holes in the floor ! My wife and I flew back to St. Louis from Colorado for my 10 year High School reunion, we had been married about 1 year.I used an old 71 Ford truck that I had given to my dad to use while I was working in Colorado to drive downtown to the reunion. On the way there my wife was putting lotion on her hands and dropped her ring and it fell thru the floor onto the highway while I was driving 70 MPH in the fast lane in rush hour traffic ! She screamed stop! I said yeah right, needless to say it was gone ! the good thing is she took insurance out on the ring two days before we left!
|
![]() |
![]() |
![]() |
#15 |
hart
Join Date: Jul 2004
Location: hell nebraska
Posts: 115
|
ironic huh 2 days before.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|