Anybody have a picture of........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 02-24-2005, 07:52 PM

Can somebody direct me to a picture of the top plate that holds the front leaf springs onto the axle please?? If there aren't any pics on the Board right now, could one of you members that has a 71/72 4x4 please snap a pic of this plate and post it so I can show another member what I'm looking for. He might have some of these laying around and I need two of them.

Thanks for your help on this,
72longbed

**JIMs70GMC** · 02-24-2005, 07:53 PM

you see any in my signature link?

*72longbed* · 02-24-2005, 08:16 PM

Jim,
the closest pic that shows a spring plate is a shot of the front of your suspension and the plate doesn't show up because the leaf spring blocks it out.

Maybe if you get a chance you can take a pic from above the plate and post it for me? If you can that would be great, if not thats OK.

Thanks,
72longbed

**JIMs70GMC** · 02-24-2005, 08:47 PM

Have to do it tomorrow, it's raining now.

BLAZERMAN · 02-25-2005, 12:11 AM

I think this is what your looking for.

*72longbed* · 02-25-2005, 12:44 AM

Blazerman,
thanks, thats the animal I need. I need left and right side if anybody out there has any. (Maybe they just rotate to fit either side, I don't know?)

Thanks Again,
72longbed

*72longbed* · 03-02-2005, 11:35 PM

Still need a pair of these if anybody has them?

What years use the same as 71/72 4x4??

72longbed

6869704X4 · 03-03-2005, 01:55 PM

Im not 100% sure but I think the only difference in the newer ones is the stabilizer bar mount. 73 and up.
Anybody else?

Truckstuff · 03-05-2005, 12:46 AM

The other difference is the holes for the U-Bolts, Earlier Dana 44 axle tubes were 2 3/4" (1971 to 1975?) and the newer ones are 3"

jims69 · 03-09-2005, 06:24 PM

Are these what you are looking for? Where are you from in pa. I am near Pittsburgh.

*72longbed* · 03-10-2005, 12:45 AM

Jim,
yes those are the plates. I got a set from GM72K10 the other day and meant to update all of the Threads on the Board. I guess this one slipped by me.

Thank you for looking, I'm in the southwest end of PA near Valley Forge.

Thanks,
72longbed

02-24-2005, 07:52 PM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Anybody have a picture of........ Can somebody direct me to a picture of the top plate that holds the front leaf springs onto the axle please?? If there aren't any pics on the Board right now, could one of you members that has a 71/72 4x4 please snap a pic of this plate and post it so I can show another member what I'm looking for. He might have some of these laying around and I need two of them. Thanks for your help on this, 72longbed

02-24-2005, 07:53 PM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	you see any in my signature link? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-24-2005, 08:47 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Have to do it tomorrow, it's raining now. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-25-2005, 12:11 AM	#5
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	I think this is what your looking for. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

02-25-2005, 12:44 AM	#6
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	You Da' Man!! Blazerman, thanks, thats the animal I need. I need left and right side if anybody out there has any. (Maybe they just rotate to fit either side, I don't know?) Thanks Again, 72longbed

02-24-2005, 08:16 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Jim, the closest pic that shows a spring plate is a shot of the front of your suspension and the plate doesn't show up because the leaf spring blocks it out. Maybe if you get a chance you can take a pic from above the plate and post it for me? If you can that would be great, if not thats OK. Thanks, 72longbed

03-02-2005, 11:35 PM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Still need a pair of these if anybody has them? What years use the same as 71/72 4x4?? 72longbed

03-03-2005, 01:55 PM	#8
6869704X4 Registered User Join Date: Jul 2002 Location: SE NM Posts: 769	Im not 100% sure but I think the only difference in the newer ones is the stabilizer bar mount. 73 and up. Anybody else? __________________ The more I learn about women, the more I love my truck.

03-05-2005, 12:46 AM	#9
Truckstuff Registered User Join Date: Dec 2003 Location: Cloverdale, British Columbia Canada Posts: 159	The other difference is the holes for the U-Bolts, Earlier Dana 44 axle tubes were 2 3/4" (1971 to 1975?) and the newer ones are 3" __________________ Real Trucks are Built not Bought Building: 1981 GM SB LowRider 1985 GM K3500 3+3 1981 GM K2500 SSB 1980 GM K2500 X-BC Hydro 1979 GM K3500 3+3 1976 GM K5 Blazer 1970 Custom 10 http://bc4x4.com/

03-09-2005, 06:24 PM	#10
jims69 Registered User Join Date: Feb 2005 Posts: 82	Are these what you are looking for? Where are you from in pa. I am near Pittsburgh. Attached Images __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

03-10-2005, 12:45 AM	#11
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Jim, yes those are the plates. I got a set from GM72K10 the other day and meant to update all of the Threads on the Board. I guess this one slipped by me. Thank you for looking, I'm in the southwest end of PA near Valley Forge. Thanks, 72longbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.