|
05-13-2005, 06:02 AM
|
#1 |
|
Senior Member
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,628
|
Carter 9635 AFB
I just pulled the carb from my old project Suburban. It turns out I had a 625 CFM Carter AFB on a 454. I'm thinking of rebuilding the carb. Does anyone know if this translates to an Edelbrock number? It's not a full-blown Q-Jet style spread bore, but the primaries are smaller in diameter than the secondaries.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
|
|
05-13-2005, 07:31 AM
|
#2 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
It would be equal to Edelbrocks 1406.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
|
|
|
05-15-2005, 04:54 AM
|
#3 |
|
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,628
|
Thanks. I guess EDL-1477 Recarb kit is the right stuff, then?
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
|
|
|
05-15-2005, 09:04 AM
|
#4 |
|
Registered User
Join Date: Jun 2004
Location: warr acres,oklahoma
Posts: 650
|
right front mounting ear will have carter carb # on it for parts.you can get a carb kit for that from your local parts store in a different brand(borg-warner,in-house brand,etc.,),and probably save some bucks over the paying the high cost of the edelbrock name.good luck
|
|
|
|
|
05-15-2005, 10:59 AM
|
#5 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Look here at Summit part number CRT-902317A:http://store.summitracing.com/defaul...=egnsearch.asp
The EDL kit looks to have more parts for about 10 bucks so it might be worth it to just get it.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 05-15-2005 at 11:06 AM. |
|
|
|
|
05-16-2005, 05:26 AM
|
#6 |
|
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,628
|
Edelbrock 1477 kits run about $33 at the local hot rod shop here. Jeg's wants $35 (+ 10 "handling"). Sweet -- I can get a real Carter zip kit from Summit.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 05-16-2005 at 05:31 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
