WTB Heater Control Mechanism - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cgrossl · 09-16-2005, 04:34 PM

I would like to buy the heater control mechanism for my 72 Cheyenne. It does not have A/C. I am talking about the assembly that has the heater control levers in it and also the fan switch. I don't need the switch, but I do need the assembly. My temperature control lever is broken off.

Joe67 · 09-16-2005, 05:41 PM

If nobody here comes forward, there are usually plenty on ebay for good prices

thejoker · 09-16-2005, 06:53 PM

I have one I'll sell you $20 + ride. It's not show quality but it works. I can get you some pics if you like. I live in Gulfport and work for the phone company and we are working 12+ hour days 13 days on 1 off. I think I can get a picture in the morning before I leave if you like?

DP

69Goody · 09-16-2005, 07:12 PM

I have this...
Maybe between this and what you have might work for you.
The control in the left is gone (using it in my new one.)
Also, the top lever control is broken, but it has been put in working condition with a little fabricated/riveted bandaid.

If it will work for you...PM me...

RicksTrucks · 09-16-2005, 09:28 PM

Yours won't work, it is for an A/C cab

Quote:

Originally Posted by 69Goody

I have this...
Maybe between this and what you have might work for you.
The control in the left is gone (using it in my new one.)
Also, the top lever control is broken, but it has been put in working condition with a little fabricated/riveted bandaid.

If it will work for you...PM me...

69Goody · 09-16-2005, 10:15 PM

Ahhh....
I didn't know if the levers and such were the same or not.

4tiresngas · 09-16-2005, 10:37 PM

cgrossl,

I went to the salvage yard today and got the wiring harness that goes from the heater switch to the fan. I took my camera with me. These aren't mine, but I can get one for you. The guy wants $20 a piece.

cgrossl · 09-17-2005, 02:05 AM

Dan,
The one in the picture looks fine to me. How much do you want for one, shipped to Lexington, KY 40517?

4tiresngas · 09-17-2005, 12:06 PM

Cgrossl, I think the PO has a Priorty Mail Package that it will fit in that is 7.70 to anywhere in the US. So, total would be 27.70.

When do you need it by? The parts yard is 40 miles away. If I can get him to pull it for me, my wife could probably pick it up Monday or Tuesday.

cgrossl · 09-17-2005, 04:35 PM

Dan,
I am in no hurry. Don't make a special trip for me. This truck just sits in the garage most of the time. I would like to get this fixed sometime before winter so I have some heat if I need it.

**john** · 09-17-2005, 06:40 PM

Some of the board venders have steel replacement levers that wont break like factory levers. John

4tiresngas · 09-17-2005, 07:06 PM

Okay, I'll let you know when i get it. I might just snag the other one too. I know guys need them. Me...the Army stationed me in the Mojave Desert in Southern California. I'm still trying to figure out who I pissed off...lol. It's HOT...like a desert or something...lol

WRMZ71 · 09-19-2005, 07:04 PM

I got one as well. I posted it for another guys wanted to buy post as well so if he calls it first then I can't help you. Mines got the steel non pop levers in it and the new chrome sticker on the front. 50 bucks and its to your door. that includes shipping.

cgrossl · 09-20-2005, 01:33 AM

Have you got a pic by any chance? I am interested.

ZOOMY · 09-20-2005, 02:13 AM

Replace the levers with steel ones. No more breaky.

WRMZ71 · 09-20-2005, 06:23 PM

Here are the pics. Sorry for the quality but I only got a 20 dollar cheapy walmart special. As I stated before the steel non-pop levers are on there. You are currently 2nd in line as well. i'll let you know if the other guy gets em or not.

cgrossl · 09-20-2005, 08:41 PM

See my reply directly below this one.

I'll take it if the other guy falls through.

cgrossl · 09-21-2005, 03:24 PM

I hate to say something and then take it back, but I haven't got any confirmation on buying the mechanism for $50 yet so I think that I am still good.

Anyway, I just found the rebuild kit with all new levers and the new front for $20 so I think that I am going to go that route.

Thanks for all of the responses though.

4tiresngas · 09-21-2005, 06:40 PM

Cgrossl,

Hey, I got the one from the salvage yard. It's the one in the white truck. The one in the blue had a rivet loose on the back. I got it for $15. So, if you still want it, it will be $22.70 shipped.

If not, let me know and I'll put it on the board. Someone else might want it.

cgrossl · 09-21-2005, 09:28 PM

Dan,
For that price, I can't pass it up. I'll take it. I sent you a PM so we can complete the transaction.

4tiresngas · 09-22-2005, 06:05 PM

Cameron,

I mailed it Priorty Mail today!

09-16-2005, 04:34 PM	#1
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	WTB Heater Control Mechanism I would like to buy the heater control mechanism for my 72 Cheyenne. It does not have A/C. I am talking about the assembly that has the heater control levers in it and also the fan switch. I don't need the switch, but I do need the assembly. My temperature control lever is broken off.

09-16-2005, 05:41 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	If nobody here comes forward, there are usually plenty on ebay for good prices __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

09-16-2005, 06:53 PM	#3
thejoker Registered User Join Date: Jun 2005 Location: Gulfport Mississippi Posts: 364	I have one I'll sell you $20 + ride. It's not show quality but it works. I can get you some pics if you like. I live in Gulfport and work for the phone company and we are working 12+ hour days 13 days on 1 off. I think I can get a picture in the morning before I leave if you like? DP __________________ **Have you ever danced with the devil in the pale moonlight....I ask that of all my prey** 68' C10 Short Step (rebuilding as we speak) 72' Custom Camper (wrecked, parting out) 79' C10 Fleet (rough, parting out) 97' C1500 Short Step Custom (DD) 97' Kawaski VN800a Customized 99' Z71 Silverado 04' Suzuki Volusia

09-16-2005, 07:12 PM	#4
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Might have what you need.... I have this... Maybe between this and what you have might work for you. The control in the left is gone (using it in my new one.) Also, the top lever control is broken, but it has been put in working condition with a little fabricated/riveted bandaid. If it will work for you...PM me... __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

09-16-2005, 10:15 PM	#6
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Ahhh.... I didn't know if the levers and such were the same or not. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

09-16-2005, 10:37 PM	#7
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	cgrossl, I went to the salvage yard today and got the wiring harness that goes from the heater switch to the fan. I took my camera with me. These aren't mine, but I can get one for you. The guy wants $20 a piece. __________________ Dan dan.brue@us.army.mil

09-17-2005, 02:05 AM	#8
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	Dan, The one in the picture looks fine to me. How much do you want for one, shipped to Lexington, KY 40517?

09-17-2005, 12:06 PM	#9
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Cgrossl, I think the PO has a Priorty Mail Package that it will fit in that is 7.70 to anywhere in the US. So, total would be 27.70. When do you need it by? The parts yard is 40 miles away. If I can get him to pull it for me, my wife could probably pick it up Monday or Tuesday. __________________ Dan dan.brue@us.army.mil

09-17-2005, 04:35 PM	#10
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	Dan, I am in no hurry. Don't make a special trip for me. This truck just sits in the garage most of the time. I would like to get this fixed sometime before winter so I have some heat if I need it.

09-17-2005, 06:40 PM	#11
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Some of the board venders have steel replacement levers that wont break like factory levers. John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

09-17-2005, 07:06 PM	#12
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Okay, I'll let you know when i get it. I might just snag the other one too. I know guys need them. Me...the Army stationed me in the Mojave Desert in Southern California. I'm still trying to figure out who I pissed off...lol. It's HOT...like a desert or something...lol __________________ Dan dan.brue@us.army.mil

09-19-2005, 07:04 PM	#13
WRMZ71 Cause the Chicks DIG IT!! Join Date: Nov 2003 Location: Beaufort SC Posts: 509	I got one as well. I posted it for another guys wanted to buy post as well so if he calls it first then I can't help you. Mines got the steel non pop levers in it and the new chrome sticker on the front. 50 bucks and its to your door. that includes shipping.

09-20-2005, 01:33 AM	#14
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	Have you got a pic by any chance? I am interested.

09-20-2005, 02:13 AM	#15
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	steel levers Replace the levers with steel ones. No more breaky.

09-20-2005, 06:23 PM	#16
WRMZ71 Cause the Chicks DIG IT!! Join Date: Nov 2003 Location: Beaufort SC Posts: 509	Here are the pics. Sorry for the quality but I only got a 20 dollar cheapy walmart special. As I stated before the steel non-pop levers are on there. You are currently 2nd in line as well. i'll let you know if the other guy gets em or not. Attached Images



Register or Log In To remove these advertisements.

09-20-2005, 08:41 PM	#17
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	See my reply directly below this one. I'll take it if the other guy falls through. Last edited by cgrossl; 09-21-2005 at 03:25 PM.

09-21-2005, 03:24 PM	#18
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	I hate to say something and then take it back, but I haven't got any confirmation on buying the mechanism for $50 yet so I think that I am still good. Anyway, I just found the rebuild kit with all new levers and the new front for $20 so I think that I am going to go that route. Thanks for all of the responses though.

09-21-2005, 06:40 PM	#19
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Cgrossl, Hey, I got the one from the salvage yard. It's the one in the white truck. The one in the blue had a rivet loose on the back. I got it for $15. So, if you still want it, it will be $22.70 shipped. If not, let me know and I'll put it on the board. Someone else might want it. __________________ Dan dan.brue@us.army.mil

09-21-2005, 09:28 PM	#20
cgrossl Registered User Join Date: Oct 2003 Location: Lexington, KY Posts: 151	Dan, For that price, I can't pass it up. I'll take it. I sent you a PM so we can complete the transaction.

09-22-2005, 06:05 PM	#21
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Cameron, I mailed it Priorty Mail today! __________________ Dan dan.brue@us.army.mil

Register or Log In To remove these advertisements.