Need Help! Correct P/S and A/C brackets-pics please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 06-10-2006, 05:45 PM

Anyone have pictures of correct stock power steering and A/C brackets on a 350? I'm having a hard time finding all the correct brackets to make the pulleys line up with each other. I have double groove pulley on the water pump, double on the power steering pump and a triple on the crank. I'm starting to think the water pump is incorrect but everthing lined up before I put the stock A/C compressor on it. The compressor and brackets came off a '80 GMC with a 350 but I didn't grab the power steering brackets. Any help would be appreciated.

BTW- this is on a '74 chevy k/20 with a 350 engine.

**MJN** · 06-13-2006, 12:56 PM

Ttt

Slonaker · 06-13-2006, 02:05 PM

I don't know how much this will help, if any at all, but check these photos out. They are from my '86:

http://slonaker.net/images/truck/ac_brackets/ac1.JPG

There are about 23 photos. Just keep changing the file number in your browser... ac1.jpg, ac2.jpg, ac3.jpg, etc.

Slonaker

method2mymadnes · 06-13-2006, 03:21 PM

On which side of the engine is your AC compressor?

**MJN** · 06-13-2006, 04:40 PM

Slonaker- THanks for the pictures but I have the older style compressor (long black one). I'm not sure if it makes a difference in the bracketry though. I know the compressor brackets are different than yours. THanks

Method2mymadness-Mine is in the stock position on the driver's side above the power steering pump.

magnethead · 06-13-2006, 07:28 PM

see if these help any...it's a 454 but i would think (but i'm known to think wrong) the belts go to basically the same places, assuming your engine is not smog equipped.

**MJN** · 06-14-2006, 08:47 PM

magnethead- thanks for the pictures but only those from a small block will work because I mainly need pics of the correct brackets. I'm having a hard time getting the correct brackets on the power steering pump. THanks again.

**MJN** · 07-03-2006, 12:19 AM

Anyone else have pictures? I'm still trying to make it work, I have about 8 different sets of brackets now and still can't get the power steering to line up and now the A/C compressor isn't lined up with the intake manifold bracket. This weekend I'll be at the Iola Old Car Show on Friday so hopefully I can find something there too but anything will help.

**AspecialZ** · 07-04-2006, 03:37 PM

been there
hope these help

**MJN** · 07-04-2006, 09:33 PM

Thanks guys but I got it figured out. The power steering pump wouldn't straighten out, so I went to the junkyard and I stumbled over a front half of a '74 K/20 with the motor still sittin in the frame and it had every bracket with compressor still on it. So I grabbed the compressor, power steering pump and all the brackets I could with all the hardware too. Well, the power steering bracket that bolts to the water pump was missing a small spacer between the pump and bracket, which is behind the pulley. So all I needed was a little spacer and it's all fixed now. I took all my brackets off and put all the junkyard ones on so it's a matched set now and it all lines up perfectly. I even got lucky and it had the v-belts rusted into the pulley grooves so now I have belts to compare to the new ones I have to buy. Thanks again guys!!

krue · 07-04-2006, 09:59 PM

That's the best way to do it.

06-10-2006, 05:45 PM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,097	Need Help! Correct P/S and A/C brackets-pics please Anyone have pictures of correct stock power steering and A/C brackets on a 350? I'm having a hard time finding all the correct brackets to make the pulleys line up with each other. I have double groove pulley on the water pump, double on the power steering pump and a triple on the crank. I'm starting to think the water pump is incorrect but everthing lined up before I put the stock A/C compressor on it. The compressor and brackets came off a '80 GMC with a 350 but I didn't grab the power steering brackets. Any help would be appreciated. BTW- this is on a '74 chevy k/20 with a 350 engine. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com Last edited by MJN; 06-10-2006 at 05:46 PM.

06-13-2006, 12:56 PM	#2
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,097	Re: Need Help! Correct P/S and A/C brackets-pics please Ttt __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

06-13-2006, 02:05 PM	#3
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: Need Help! Correct P/S and A/C brackets-pics please I don't know how much this will help, if any at all, but check these photos out. They are from my '86: http://slonaker.net/images/truck/ac_brackets/ac1.JPG There are about 23 photos. Just keep changing the file number in your browser... ac1.jpg, ac2.jpg, ac3.jpg, etc. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

06-13-2006, 03:21 PM	#4
method2mymadnes Registered User Join Date: Jun 2003 Location: Dyersburg, TN Posts: 327	Re: Need Help! Correct P/S and A/C brackets-pics please On which side of the engine is your AC compressor?

06-13-2006, 04:40 PM	#5
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,097	Re: Need Help! Correct P/S and A/C brackets-pics please Slonaker- THanks for the pictures but I have the older style compressor (long black one). I'm not sure if it makes a difference in the bracketry though. I know the compressor brackets are different than yours. THanks Method2mymadness-Mine is in the stock position on the driver's side above the power steering pump. Last edited by MJN; 06-13-2006 at 04:43 PM.

06-13-2006, 07:28 PM	#6
magnethead 7000 #'s of american IRON Join Date: Dec 2004 Location: north tx Posts: 883	Re: Need Help! Correct P/S and A/C brackets-pics please see if these help any...it's a 454 but i would think (but i'm known to think wrong) the belts go to basically the same places, assuming your engine is not smog equipped.

06-14-2006, 08:47 PM	#7
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,097	Re: Need Help! Correct P/S and A/C brackets-pics please magnethead- thanks for the pictures but only those from a small block will work because I mainly need pics of the correct brackets. I'm having a hard time getting the correct brackets on the power steering pump. THanks again. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

07-03-2006, 12:19 AM	#8
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,097	Re: Need Help! Correct P/S and A/C brackets-pics please Anyone else have pictures? I'm still trying to make it work, I have about 8 different sets of brackets now and still can't get the power steering to line up and now the A/C compressor isn't lined up with the intake manifold bracket. This weekend I'll be at the Iola Old Car Show on Friday so hopefully I can find something there too but anything will help. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

07-04-2006, 03:37 PM	#9
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: Need Help! Correct P/S and A/C brackets-pics please been there hope these help Attached Images __________________ Follow me on Instagram @ hot_rod_shop

07-04-2006, 09:33 PM	#10
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,097	Re: Need Help! Correct P/S and A/C brackets-pics please Thanks guys but I got it figured out. The power steering pump wouldn't straighten out, so I went to the junkyard and I stumbled over a front half of a '74 K/20 with the motor still sittin in the frame and it had every bracket with compressor still on it. So I grabbed the compressor, power steering pump and all the brackets I could with all the hardware too. Well, the power steering bracket that bolts to the water pump was missing a small spacer between the pump and bracket, which is behind the pulley. So all I needed was a little spacer and it's all fixed now. I took all my brackets off and put all the junkyard ones on so it's a matched set now and it all lines up perfectly. I even got lucky and it had the v-belts rusted into the pulley grooves so now I have belts to compare to the new ones I have to buy. Thanks again guys!! __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

07-04-2006, 09:59 PM	#11
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Need Help! Correct P/S and A/C brackets-pics please That's the best way to do it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.